Is Silicon Dioxide Safe? What Science and Regulators Say

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is Silica Powder? Types, Particle Sizes, Grades and Common Applications
  • Keywords: spherical silica manufacturer
  • Published: 2026-11-20 03:35:56
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
To reduce or steer clear of the liquid used, it is possible to use other granulation techniques instead of the traditional wet granulation: either steam granulation or melt granulation, which decreases the risk of premature drug release compared to traditional wet granulation [ 98, 106, 108 ]. During steam granulation, steam is used rather than liquid water; it can be used with or without a binder. The steam shows a more uniform distribution than the atomization of the liquid; therefore, more regular granules are formed [ 98, 108 ]. The removal of water at the conclusion of granulation can be accomplished more quickly; a shorter process time is to be expected, so it is also an energy-efficient method.

Silica Market Size 2026: Global Value, Growth Rate and Key Segments

What Is Water Glass? Sodium Silicate Uses and Properties Explained
Lyophilization can be safely used for heat-sensitive drug substances because the drug is formulated at low temperatures and low pressure. Another advantage compared to direct compression is that the poor flowability does not cause problems here, and the pore structure of the nanoparticle is not damaged in the absence of compression. The freeze-drying process can be divided into three main steps: freezing, primary drying, and secondary drying [ 101 ]. The loaded carriers are homogenized with the prepared polymer solution [ 102, 103 ], containing matrix agents (PEG, polyvinyl alcohol (PVA), hydroxyethyl cellulose (HEC), polyvinylpyrrolidone (PVP), alginate, dextran), cryoprotectants (sucrose, or sugar alcohols such as mannitol, sorbitol), surfactants (polysorbates, sorbitan monooleate), super disintegrants (croscarmellose sodium) [ 102 ]. The resulting dispersion is filled into blisters and then lyophilized [ 102, 103 ]. During the process, the desired tablet shape is formed, adapting to the shape of the blister [ 102 ]. They are characterized by rapid disintegration (less than 30 s), low moisture content, and rapid dissolution [ 41, 102, 103 ]. Elmowafy et al. effectively optimized lyophilized tablet formulations using quercetin-loaded MSN carriers [ 41 ]. PVP-K30 was used as a polymeric stabilizer, PEG 6000 as a co-binding polymer, and sucrose as a cryoprotectant. This freeze-dried formulation permits fast disintegration and low friability (less than 1%). Importantly, the saturation solubility and the dissolution rate, and so the oral bioavailability of the poorly water-soluble quercetin boosted particularly, and it can be further improved by sublingual application [ 41 ]. Utilizing the right composition, an orally dispersible tablet can be produced, which is why its sublingual use is advantageous, because the API goes directly into the systemic circulation (bypassing the enteral circulation, so the first pass impact does not apply), hence improving oral bioavailability [ 41, 100 ]. Besides immediate drug release, sustained and even targeted drug release is also available, provided by appropriate formulation, thus increasing the therapeutic possibilities. These days, gastroretentive and mucoadhesive freeze-dried tablets are also available, further broadening the spectrum [ 102, 103 ].
Spherical Silica Powder: Specifications, Particle Sizes and How to Choose the Right Grade
In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].
Foundry Silica Sand: AFS Grain Fineness, Specifications and Uses
Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].
Silica Flatting Agent: Gloss Reduction Mechanism, Grades and Applications
78. Guo X., Zhang C., Bai Y., Che Q., Cao H., Guo J., Su Z. Synthesis of Chitosan Oligosaccharide-Loaded Glycyrrhetinic Acid Functionalized Mesoporous Silica Nanoparticles and In Vitro Verification of the Treatment of APAP-Induced Liver Injury. Molecules. 2023;28:4147. doi: 10.3390/molecules28104147. [ DOI ] [ PMC free article ] [ PubMed ] [ Google Scholar ]

Microsilica for Cement: Benefits, Dosage Guidelines and Applications

What is silica (SiO₂)?

monocrystalline silicon 65. Mal A., Prabhuraj R., Malhotra R., Valvi S.K., Ingle A., Srivastava R., De A., Bandyopadhyaya R. pH-responsive sustained delivery of doxorubicin employing aminated and PEGylated mesoporous silica nanoparticles leads to boosted antitumor efficacy in pre-clinical orthotopic breast cancer model. J. Drug Deliv. Sci. Technol. 2022;77:103800. doi: 10.1016/j.jddst.2022.103800. [ DOI ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

silica density 52. Minecka A., Tarnacka M., Jurkiewicz K., Żakowiecki D., Kamiński K., Kamińska E. Mesoporous Matrices as a Promising New Generation of Carriers for Multipolymorphic Active Pharmaceutical Ingredient Aripiprazole. Mol. Pharm. 2023;20:5655-5667. doi: 10.1021/acs.molpharmaceut.3c00524. [ DOI ] [ PMC free article ] [ PubMed ] [ Google Scholar ]

What drives silica raw material prices?

silica rheology control

Cite this article: Silica Raw Materials News. "5N Quartz Sand: Purity Specifications, Key Impurities and High-Tech Applications ." Published 2026-11-20 03:35:56. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.