Angular Silica Powder: Properties, Uses and When to Choose It Over Spherical Silica

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Colloidal Silica Slurry: Specifications and Uses in CMP and Precision Polishing
  • Keywords: silica slurry
  • Published: 2026-11-20 00:28:21
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Silica Aerogel Blanket: Thermal Conductivity, Thickness Options and Insulation Uses

Silica Supplier Indonesia: Market Overview and Sourcing Options
The word "diatomaceous" comes from the root word "diatom", which is a single-celled organism. Diatomaceous earth forms over a long period of time as millions of these organisms fossilize in lake beds. These lake beds then dry up, exposing the sedimentary deposit that we call diatomaceous earth.
Silica Supplier South Africa: Producers, Grades and Sourcing Options
Solvay Zeosil: Highly Dispersible Silica Grades for Tires and Rubber
In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].
Hollow Glass Microspheres vs Hollow Silica: Lightweight Fillers Compared
7.2. Granules/Pellets

Silica Wholesale: How to Buy in Bulk and Get the Best Price

What is silica (SiO₂)?

angular silica powder It is necessary to grasp the drug release mechanisms in porous media. Three categories can be distinguished based on the driving forces that generate mass transport: advection, diffusion, and electrophoresis [ 3 ]. For nanocarriers, advection and diffusion are the most considerable types. In the case of advection, the liquid as a medium conducts the material transport. This fluid motion is ensured by mechanical forces (pressure, gravity, cohesive and adhesive forces) [ 3 ]. Additionally, three subcategories can be distinguished here: film flow, capillary flow, and permeation. In the case of film flow, the liquid spreads into a thin liquid layer in contact with the surface of the pores. This spreading produces the required flow pattern. Capillary flow is made sure by capillary action. The surface tension of the liquid and the combined impact of adhesive and cohesive forces contribute to its creation. The pressure difference across the meniscus in the capillary causes the movement of the liquid along the capillary. During permeation, the flow of the liquid through the pores was created with the help of an external driving force (pressure) rather than an internal one [ 3 ]. Another significant material flow category is diffusion [ 2, 57 ]. The driving force comes from the concentration difference, which is equalized by the Brownian motion of the particles [ 3 ].

What is the difference between fumed silica and precipitated silica?

is silica in toothpaste safe

What drives silica raw material prices?

cosmetic grade silica 102. Tran P.H.L., Lee B.J., Tran T.T.D. Strategies and formulations of freeze-dried tablets for controlled drug delivery. Int. J. Pharm. 2021;597:120373. doi: 10.1016/j.ijpharm.2021.120373. [ DOI ] [ PubMed ] [ Google Scholar ]

Cite this article: Silica Raw Materials News. "What Is the Refractive Index of Silica? Values for Fused Silica, Quartz and Amorphous Silica ." Published 2026-11-20 00:28:21. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.