SiO₂ Explained: Chemical Formula, Structure, Properties and Applications of Silicon Dioxide

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silica as a Flow Agent: How It Improves Powder Flowability
  • Keywords: silicon dioxide in food
  • Published: 2026-11-20 08:19:08
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Feed Grade Silica: Specifications and Uses as a Carrier and Flow Agent in Animal Feed

Silica Sand for Glass: Iron Content, Grades and Specifications
Aerosil Alternative: Equivalent Fumed Silica Grades and How to Switch
Nanocarriers can be divided into two principal groups: organic and inorganic types. The organic group contains lipid nanocarriers, liposomes, polymeric nanoparticles, dendrimers, etc. In the case of the carriers in this group, the limited volume of delivered active pharmaceutical ingredient (API) is a clear disadvantage, along with decreased stability, and good sensitivity to temperature, pH, and enzymes in a physiological environment. The inorganic group contains metal oxide-, carbon-, silicon-, silica-, and quantum dot-based nanocarriers. Their benefits are greater stability and well-tunable physicochemical properties, but their accumulation in the body may be a key question of their applicability. Silica nanoparticles (SNP) are silicon dioxide (SiO 2 ) nanoparticles in an amorphous state and have excellent potential in the pharmaceutical industry and drug development due to their special properties. According to pore size, the most common, most well-liked, and most effective type of silica nanocarriers are the mesoporous silica nanoparticles (MSNs) [ 1 ].
Silica as an Abrasive: Hardness, Particle Size and Applications
Table 3.
What Is Mesoporous Silica? Structure, Pore Size and Applications in Drug Delivery and Catalysis
The carriers can have ordered and disordered pore structures [ 1, 2 ]. The ordered mesopores have a regular, homogeneous pore structure and a tunable internal frame, which permits the optimization of the API formulation, while the disordered ones have a random distribution of pore structure. Pores can be divided into two chief groups according to their geometry. There are open and closed pores, based on whether the pore is accessible to the medium or not. In the case of open pores, further differentiation is also possible. Blind pores are only accessible from one direction, while through pores are accessible from at least two directions [ 3 ]. The arrangement of the pores can also be defined and changed, hence the kinetics and dynamics of the release of the API can be influenced and regulated [ 1 ]. Laminar (tubular), radial, hexagonal, or cubic arrangements can also be created [ 1 ]. It is well known that the pore size significantly affects drug loading and drug release [ 1, 3 ]. Nonetheless, the literature is not crystal clear regarding correlation [ 14 ]. Some studies show proof that larger pores provide faster drug release [ 15, 16, 26 ], and larger pores have demonstrated a faster degradation rate in the lymph nodes [ 15 ], and reports limited release for smaller pores as they limit the diffusion process, which is called the steric hindrance influence [ 16, 26 ]. Nevertheless, in other publications, proof recommends that larger pores facilitate slower drug release, as the drug is loaded and trapped in deeper channels, requiring a longer access time for the release medium [ 14 ]. In general, the adsorption capacity can indeed be increased by increasing the specific surface area of the carrier and by decreasing the pore diameter [ 17 ].

Precipitated Silica Manufacturer: Production Process and Supplier Selection Guide

What is silica (SiO₂)?

silica vs quartz 105. Baumgartner A., Planinšek O. Impact of process parameters in high shear granulation on characteristics of a novel co-processed mesoporous silica material. Eur. J. Pharm. Sci. 2023;188:106528. doi: 10.1016/j.ejps.2023.106528. [ DOI ] [ PubMed ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

silica for 3D printing One of the biggest challenges of tableting greatly potent APIs (antibiotics, hormones, cytostatic molecules) is to attain content uniformity [ 95, 96 ]. Since these molecules are used in small doses, it is demanding to attain a homogeneous powder mixture during mixing and to make sure this homogeneity until the end of tableting. Also, it is a hurdle to develop a reproducible method that ensures content uniformity for each production batch, since the specified dose must be made sure between batches, not just within one batch [ 95, 96 ]. A reliable alternative method is to use mesoporous silica as a carrier system rather than simple powder mixing, thus preventing the segregation and aggregation of the low-dose API during mixing and compression. In this case, the preloaded mesoporous carrier and the necessary excipients are mixed, and then the powder mixture can be compressed directly or after granulation. The drug loading can be controlled by the concentration of the drug solution used to fill the carrier systems, which affects the amount of the drug content in the concluding medicine [ 95, 96 ]. Based on this, nearly unlimitedly low doses can be formulated into tablets, even in a concentration of 0.01%, just by properly preparing the solution [ 96 ]. The technique is well-controllable and dependable, since each tablet has the same drug content and the desired content uniformity. Furthermore, the method can be used in both batch-based and continuous production [ 96 ]. This may be a promising finding because there is evidence that it is challenging to move from batch-based to continuous manufacturing while maintaining the desired drug content and content uniformity [ 94 ]. But it should be noted that in this study, no nanocarrier system was used [ 94 ], so utilizing MSN formulations could make an enormous improvement in developing continuous tablet manufacturing [ 96 ]. A study shown that MSN carriers can also be used in orodispersible films to enhance the dissolution of poorly water-soluble drugs [ 100 ]. Based on in vitro drug release studies, more than 90% of prednisolone was released within 2 min when the loaded MSN was incorporated into the formulation. This means a much faster, immediate release in comparison with formulations containing the free form of the drug. In addition, precise dosing can be accomplished utilizing nanocarriers for personalized medication; furthermore, enabling the production of low-dose preparations without content uniformity problems [ 100 ].

What drives silica raw material prices?

silica supplier Germany

Cite this article: Silica Raw Materials News. "How to Buy Fumed Silica: Grade Selection, Sampling and Supplier Evaluation ." Published 2026-11-20 08:19:08. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.