📌 Key Takeaways
- Topic: Aluminum Silicate vs Silica: Composition, Properties and Uses Compared
- Keywords: silica gel
- Published: 2026-11-20 01:52:37
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Silica Fume for Concrete: Dosage, Benefits and How It Improves Strength
- Monodisperse Silica Spheres: Size Control, Synthesis and Applications
- What Is Silica? A Simple Explanation of Silica, Its Forms and Uses
- Mesoporous silica nanoparticles (MSNs) are a flexible platform for the improvement of water solubility and bioavailability of poorly water-soluble drugs through the stabilization of the API in the amorphous state. Two outstanding mechanisms facilitate such stabilization: physical entrapment within nanoscale pores with a diameter less than the size of the critical nucleus. In this case, the ordered molecular packing necessary to develop crystals cannot advance. Moreover, the unique interactions between the functional groups of APIs and the surface silanol groups of MSNs may immobilize drug molecules at or close to pore walls [ 44, 45 ]. Bavnhøj et al. used celecoxib to demonstrate that when loading is conducted under the pore-filling ability (PFC) of the silica matrix, the drug will be physically stable and amorphous for at least 18 months of dry storage. PFC-loaded along with near-PFC-loaded samples recrystallized, especially upon exposure to moisture, demonstrating the razor-thin margin between the level of loading and stability [ 46 ]. Although advantages are present, long-term stability is undermined by stress recrystallization. For example, α-mangostin began to recrystallize after 7-14 days at 25 °C and 95% relative humidity in MSNs with slightly broader pore size than the molecular size of the API, indicating that pore size must be finely tuned for productive confinement [ 47 ]. Similarly, simvastatin had the longest amorphous lifespan when loaded into pores of 4.5 nm. Still, it exhibited rapid recrystallization in materials with bigger pore size, underlining the critical importance of pore size for the preservation of amorphous stability [ 45, 47 ].
- Silica and Hydrofluoric Acid Reaction: Equation, Mechanism and Uses
- The skin is our largest organ, which consists of three layers: the epidermis, dermis, and hypodermis. Owing to its big surface zone, it also serves as an essential gateway for drug administration [ 25 ], which is fitting for both local (dermal) or systemic (transdermal) therapy [ 25, 56 ]. In spite of the popularity of this administration route, it is a challenge to get the API into deeper layers of the skin. The outermost layer of the epidermis, the stratum corneum, is the biggest hurdle to molecular penetration [ 25, 56 ]. However, the molecules must be absorbed through the capillaries of the dermis to achieve a systemic impact, which can be facilitated employing nanocarriers [ 56 ]. In addition, sweat glands or hair follicles can be effective alternative routes for the molecules to enter the deeper layers of the skin [ 25, 56 ]. In summary, it can be called as the transappendageal route. Among physicochemical properties, particle size is one of the most vital factors influencing absorption. Particles in the range between 200 and 300 nm are suitable for local treatment of the skin in diseases such as atopic dermatitis [ 25 ] since particles larger than 75 nm do not pass through the stratum corneum [ 25 ]. Smaller particles (approximately 50 nm) are suitable for systemic treatment [ 25 ], and on the whole, it can be said that nanoparticles with a diameter smaller than 25 nm can penetrate the skin most effectively, so they can be used for transdermal drug administration with an appropriate formulation [ 56 ]. By controlling the size of the nanocarrier, they penetrate to different depths in the skin. From the element of surface characteristics, cationic amino-functionalized MSNs show more efficient penetration into deeper layers of the skin than the particles with anionic surfaces of the same size [ 25 ]. The use of MSNs as a drug carrier may improve aqueous solubility, stability, and skin penetration of the drug [ 61 ]. In a research, gels containing MSN were prepared by employing distilled water to form the base, adding the gelling agent (Poloxamer 407), and adding HPMC to enhance the viscosity [ 83 ]. In another publication, MSN containing oleogels were prepared with sunflower oil and the addition of colloidal silicon dioxide as a gelling agent [ 61 ]. According to in vitro experiments, the gel matrix also affected the drug release kinetics [ 61, 83 ]. Slower drug release was observed in the case of gels containing loaded MSNs, compared to the free carriers, and the outcomes demonstrated close to zero-order release kinetics [ 61 ]. According to in vitro biocompatibility studies, this gel complex did not show any evidence of cytotoxicity on dermal fibroblast cells. Moreover, according to in vivo dermal safety studies, it has been proven that this preparation does not cause skin irritation during application, and so this formulation can be considered a safe product [ 61 ].
- Porous Silica: Types, Pore Structure and Applications in Adsorption and Catalysis
- MSNs are SiO 2 nanoparticles [ 2 ] with a pore diameter between 2 and 50 nm [ 3, 4 ] and with a total diameter of a maximum of 1 µm. Their use in drug delivery dates to the early 1990s when they were synthesized for various scientific applications [ 5 ]. The material known as mesoporous silica was discovered by Mobil Oil Corporation in 1992 [ 6 ]. Their first drug delivery application was demonstrated in 2001 when MCM-41 silica was used to release ibuprofen [ 7 ]. Since then, MSNs have become an increasingly popular drug delivery system due to their advantageous properties and have been typically recognized as secure (GRAS) by the FDA. Tiny SNPs have been approved for human clinical imaging studies, setting the stage for their use in clinical applications of drug delivery. The number of related research activities is continuously increasing each year, expanding their role in cancer treatment, gene delivery, and oral illness therapy [ 5 ]. Their pore size is located between microporous and macroporous systems. They can be used in diverse shapes (sphere, cube, ellipsoid, rod) and sizes, with different pore sizes and pore structures [ 2, 3, 4, 8, 9, 10 ]. They have a high degree of stability [ 8 ] and a rigid framework, which results in resistance to temperature, pH, enzymatic degradation, and mechanical force [ 4 ]. Thanks to the large number of pores, they have a massive particular surface region (approx. 700-1300 m 2 /g) and pore volume (approx. 0.5-1.5 cm 3 /g), which enables effective adsorption of diverse molecules [ 2, 3, 4, 8, 9, 10 ]. By changing the pore size distribution, the range of adsorbable molecules can be controlled [ 3 ], which also lets separation based on size exclusion, which means selective adsorption of molecules of certain sizes. Depending on the size of the pores, tiny molecules together with high molecular weight proteins can be transported into the pores [ 8 ]. In addition, chemical separation is also possible if the surface of the pores is coated with specific functional groups [ 4 ], which enables the separation of the APIs according to their structure [ 4 ]. Such modifications may include the setting of hydrophilicity/hydrophobicity of the surface, depending on whether the adsorption of hydrophobic or hydrophilic molecules is targeted [ 4 ]. By inserting different functional groups, the surface charge can also be controlled so that certain molecules will bind more efficiently. MSNs have a negative surface charge in biological environments, which promotes the electrostatic adsorption of positively charged APIs in the pores [ 10 ]. Moreover, the biological markers attached to the surface of the nanoparticles enable the drug-carrying system to deliver the API in a tissue-specific manner [ 2, 4, 8, 9, 10 ]. A substantial problem is the premature release of the API from the pores during transport [ 4, 8 ], which can be solved by utilizing gatekeepers that respond to special stimuli and keep the pores closed until the stimulus [ 2, 4, 8 ]. In this way, controlled drug delivery and stimuli-responsive release can be achieved [ 2, 4, 9 ]. The drug release could be triggered by temperature, pH, redox potential, light, enzymes, magnetic field, or different ligands [ 4, 8, 11 ].
Quartz CAS 14808-60-7: Identification, Hazards and Regulatory Information
What is silica (SiO₂)?
silica for silicone rubber In the other case, the adsorption capacity of the carriers decreases owing to granulation, which can impair the absorption of the molecules, since the binder can cover the surface of the pores or fill the channels [ 105, 107 ]. To conclude, the optimization of the granulation process is necessary for the drug-carrier complex used. Dry granulation cannot be used as a granulation technique for such carriers, as high compression forces can damage the pore structure [ 98 ].
What is the difference between fumed silica and precipitated silica?
quartz Because of its porous and abrasive nature, diatomaceous earth is an effective pesticide against anything with an exoskeleton. This includes just about every bug you can think of from the smallest bedbug to the largest scorpion. It is not effective on mice or other rodents, as they have the same protection to DE that we do: skin. DE works by scratching away at the waxy coating on an insect until it penetrates its shell and absorbs its fluids. This causes quick dehydration, leading to a quick death. There are several advantages and disadvantages to using DE as a pest control.
What drives silica raw material prices?
silica production process Nevertheless, mesoporous carriers are frequently associated with poor tabletability because of bad powder flow behavior; thus, direct tableting can only be attained by adding diverse excipients in large quantities [ 95 ]. Such useful excipients include microcrystalline cellulose (filler), lactose monohydrate (filler), PVP (binder), sodium carboxymethylcellulose (disintegrant), croscarmellose sodium (super disintegrant), colloidal silica (anti-adhesion material), magnesium stearate (lubricant), and talc (lubricant) [ 39, 95, 96, 97 ]. However, the drug content in the dosage unit decreases with high amounts of excipients added, so larger tablets must be designed to attain the proper dose [ 95 ]. Another issue is that the greater compression force used during tableting may deform and damage the pore structure of the carrier, which might decrease the expected drug release rate [ 36, 97, 98 ]. When higher compression forces are applied, the pore diameter decreases, which affects both total pore volume and particular surface region, reducing the drug release rate from the carrier [ 97, 98 ]. The use of microcrystalline cellulose may be a solution to this problem, as it deforms plastically under pressure while distributing the energy accumulated in the tablet during compression. Furthermore, croscarmellose sodium may improve the drug release rate [ 97, 98 ]. Granulation of mesoporous material is a proper choice to solve issues related to poor powder rheology.
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.