Silica for 3D Printing: Uses in Resins, Powders and Binder Jetting

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silica Flatting Agent: Gloss Reduction Mechanism, Grades and Applications
  • Keywords: silica production process
  • Published: 2026-11-20 08:20:58
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Semiconductor Grade Silica: Purity Standards, Key Specs and Typical Uses

What Is the Boiling Point of Silica (SiO₂)? Thermal Properties Explained
5N Quartz Sand: Purity Specifications, Key Impurities and High-Tech Applications
Because this is a fine powder, it could potentially irritate anyone with sensitive lungs, among them asthmatics. If this is a cause of concern for you, we advise using a dust mask while applying DE.
Silica Specification Sheet: Key Parameters to Check Before Buying
MDPI and/or the editor(s) disclaim responsibility for any injury to individuals or property resulting from any ideas, methods, instructions or products referred to in the content.
Silicon Carbide vs Silica: Differences in Hardness, Structure and Uses
2.2. Particle Morphology

Fused Silica CAS 60676-86-0: Identification, Properties and Safety Data

What is silica (SiO₂)?

monocrystalline silicon Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].

What is the difference between fumed silica and precipitated silica?

silica surface area 48. Szegedi Á., Trendafilova I., Mihály J., Lázár K., Németh P., Momekov G., Momekova D., Marinov L., Nikolova I., Popova M. New insight on prednisolone polymorphs in mesoporous silica/maghemite nanocomposites. J. Drug Deliv. Sci. Technol. 2020;60:102092. doi: 10.1016/j.jddst.2020.102092. [ DOI ] [ Google Scholar ]

What drives silica raw material prices?

silicon dioxide covalent network

Cite this article: Silica Raw Materials News. "What Is Green Tire Silica? Role in Low Rolling Resistance and Fuel-Efficient Tires ." Published 2026-11-20 08:20:58. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.