Silica for Rheology Control: How to Select the Right Silica and Dosage

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is Fumed Silica? Production, Properties, Grades and Key Applications
  • Keywords: is silicon dioxide acidic
  • Published: 2026-11-20 11:59:12
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Nevertheless, mesoporous carriers are frequently associated with poor tabletability because of bad powder flow behavior; thus, direct tableting can only be attained by adding diverse excipients in large quantities [ 95 ]. Such useful excipients include microcrystalline cellulose (filler), lactose monohydrate (filler), PVP (binder), sodium carboxymethylcellulose (disintegrant), croscarmellose sodium (super disintegrant), colloidal silica (anti-adhesion material), magnesium stearate (lubricant), and talc (lubricant) [ 39, 95, 96, 97 ]. However, the drug content in the dosage unit decreases with high amounts of excipients added, so larger tablets must be designed to attain the proper dose [ 95 ]. Another issue is that the greater compression force used during tableting may deform and damage the pore structure of the carrier, which might decrease the expected drug release rate [ 36, 97, 98 ]. When higher compression forces are applied, the pore diameter decreases, which affects both total pore volume and particular surface region, reducing the drug release rate from the carrier [ 97, 98 ]. The use of microcrystalline cellulose may be a solution to this problem, as it deforms plastically under pressure while distributing the energy accumulated in the tablet during compression. Furthermore, croscarmellose sodium may improve the drug release rate [ 97, 98 ]. Granulation of mesoporous material is a proper choice to solve issues related to poor powder rheology.

Fumed Silica Alternatives: Cost-Effective Substitutes and How They Compare

Matting Agent for Coatings: Types, Selection Guide and Performance Comparison
Why Is Silicon Dioxide a Covalent Network Solid? Structure and Properties Explained
where M t is the volume of drug released at time t; M 0 is the opening amount of drug; D is the diffusion coefficient in the matrix; and h is the thickness of the system.
What Is Silica D50? How Median Particle Size Is Measured and Why It Matters
Fused Silica CAS 60676-86-0: Identification, Properties and Safety Data
Oral route is one of the most trustworthy and well-liked ways of drug administration, as it is one of the simplest and most convenient ways for self-medication [ 25, 56 ]. The gastrointestinal system offers an outstanding absorption surface for the introduction of the API into the systemic circulation [ 25 ]. Nevertheless, in the case of molecules with poor water solubility and poor permeability, drug formulation involves many difficulties, which can be solved by using nanocarriers [ 42, 56 ]. Ndayishimiye et al. proved that vancomycin, a high molecular weight and hydrophilic antibiotic macromolecule with poor oral bioavailability, can be effectively encapsulated using silica nanocarriers, and therefore, the necessary oral bioavailability can be made sure to eliminate the injection-related side effects [ 14 ]. The in vitro study showed a prolonged drug release from the nanocarriers compared to the pure drug form, and the in vitro permeability through Caco-2 cells revealed a significant boost in the permeation for the encapsulated drug compared to the unencapsulated form [ 14 ]. These nanocarriers may also protect pH-sensitive molecules from the acidic environment of the stomach, thereby avoiding unwanted chemical changes, and moreover, they may also protect macromolecules from enzymatic degradation [ 25, 56 ]. Based on diverse experiments, several key elements greatly influence the effectiveness of the therapy. The optimal size range was established between 50 and 200 nm [ 13 ]. Particles smaller than this are trapped in the mucus layer, and larger ones cannot pass through the tight junctions [ 13 ]. Anionic surface boosts enteral permeability [ 13, 14 ]. Overall, enteral bioavailability can be improved at several points.

What Is Modified Silica? Surface Modification Methods and Performance Benefits

What is silica (SiO₂)?

silica food additive

What is the difference between fumed silica and precipitated silica?

angular silica powder Several recent research works can support the prior finding and show that APIs in MSNs sustain their chemical structure, unaffected by covalent bonding during adsorption, storage, or release. Porras et al. observed consistent FTIR peaks for drug-MSN systems (albendazole loaded into SBA-15), confirming the preservation of functional groups [ 50 ]. Ditzinger et al. attained the stabilization of haloperidol and carbamazepine in their amorphous forms through adsorption into mesoporous silica, sustaining their chemical integrity [ 51 ]. PXRD and DSC analyses confirmed that the drugs remained amorphous post-incorporation without recrystallization for at a minimum three months. Particularly, the absence of new PXRD peaks and DSC melting endotherms during this period signals there is no chemical degradation or alteration of the chemical structure [ 51 ]. Minecka et al. demonstrated that while aripiprazole transforms from crystalline to amorphous form upon adsorption into mesoporous silica, the chemical structure of the API remains unchanged [ 52 ]. To track the molecular state of the drug during and after amorphization, calorimetric, X-ray diffraction, and dielectric methods were carried out by the researchers to provide proof. The findings recommend that the steric hindrance impact averts recrystallization, consequently preserving chemical structures as amorphous APIs revert to the original form [ 52 ]. Knapik-Kowalczuk et al. found that celecoxib in Syloid 244FP exhibits stable FTIR and NMR signals and intact molecular dynamics after amorphization, showing stabilization via physical interactions (steric hindrance and surface interactions without extra bond formation) [ 53 ]. Richter et al. converted itraconazole to an amorphous form in the presence of mesoporous silica, without altering its chemical structure, by the twin-screw extrusion method, as confirmed by consistent thermal and diffraction analyses [ 54 ]. Furthermore, Antonino et al. highlighted the transition of naproxen and ibuprofen from crystalline to amorphous when they were adsorbed into mesoporous silica (Syloid 72FP) [ 55 ]. This change is purely physical, with no chemical alterations to the drug molecules. Approaches such as differential scanning calorimetry (DSC), X-ray diffraction (XRPD), and solid-state NMR verify that the APIs' chemical structure of the APIs remains intact throughout and after amorphization. Drug adsorption onto the silica surface creates a stabilized amorphous state that resists recrystallization without changing the chemical bonds of the APIs. This stabilization stems from physical confinement and interactions such as hydrogen bonding or van der Waals forces with the silica, without any chemical reactions or degradation [ 55 ]. In summary, MSNs accomplish API amorphization and stabilization through steric confinement and non-covalent adsorption, thereby preserving chemical structures, as verified by consistent data obtained by researchers.

What drives silica raw material prices?

silicon oxide

Cite this article: Silica Raw Materials News. "Quartz Powder for Ceramics: Functions, Grades and Particle Size Selection ." Published 2026-11-20 11:59:12. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.