📌 Key Takeaways
- Topic: What Is Silica? Definition, Main Types, Key Properties and Industrial Uses (2026 Guide)
- Keywords: silica glidant for tablets
- Published: 2026-11-20 06:51:57
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Silica for Rubber: Reinforcement Benefits, Grades and Compounding Tips
- Silica Thermal Expansion Coefficient: CTE Values for Quartz vs Fused Silica
- Silica nanoparticles can be created and used in diverse shapes (sphere, cube, ellipsoid, rod). The shape of the particles can be characterized by the facet ratio, which is 1 for spherical particles, but can reach 4 in the case of elongated rod-shaped ones [ 1 ]. Particles with different aspect ratios may exhibit different biodistribution and elimination [ 10, 19, 25 ]. The residence time in the gastrointestinal system is influenced by the particle shape [ 1, 19 ]. Spherical nanoparticles have a shorter residence time than rod-shaped ones [ 19 ] and tend to accumulate in the liver. Simultaneously, in the case of rods, a more significant accumulation is observed in the spleen [ 10 ]. In addition, particles with a higher element ratio exert longer half-life in the bloodstream and show slower elimination [ 1, 19 ], possibly due to faster renal excretion of spherical than rod-shaped particles [ 19, 25 ]. By increasing the facet ratio, a longer degradation time can also be observed [ 25 ].
- What Is an Antiblock Agent for Film? How Silica Prevents Film Blocking
- 80. Ajit J. Nanoparticles in Drug Delivery. Prem. J. Sci. 2025;1:100048. doi: 10.70389/PJS.100048. [ DOI ] [ Google Scholar ]
- Silica Supplier Japan: Leading Producers and High-Purity Sourcing Options
- In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].
- Precipitated Silica Supplier: How to Compare Grades, Pricing and Reliability
- 63. Radhakrishnan D., Patel V., Mohanan S., Ramadass K., Karakoti A., Vinu A. Folic acid functionalised mesoporous core-shell silica nanoparticles loaded with carboplatin for lung cancer therapy. Microporous Mesoporous Mater. 2023;360:112708. doi: 10.1016/j.micromeso.2023.112708. [ DOI ] [ Google Scholar ]
Transparent Silica Filler: How to Keep Clarity in Coatings and Resins
What is silica (SiO₂)?
fused silica CAS 60676-86-0 Experiments carried out to investigate the effect of physicochemical properties.
What is the difference between fumed silica and precipitated silica?
silica for toothpaste abrasive 21. Talekar S., Dave R. Solubility Enhancement of a BCS Class II Drug Employing Granulated Fumed Silica as an Adsorbent. J. Pharm. Res. Int. 2017;18:1-15. doi: 10.9734/JPRI/2017/36872. [ DOI ] [ Google Scholar ]
What drives silica raw material prices?
Cabot Cab-O-Sil 75. Teruel A.H., Pérez-Esteve É., González-Álvarez I., González-Álvarez M., Costero A.M., Ferri D., Parra M., Gaviña P., Merino V., Martínez-Mañez R., et al. Smart gated magnetic silica mesoporous particles for targeted colon drug delivery: New approaches for inflammatory bowel diseases treatment. J. Control. Release. 2018;281:58-69. doi: 10.1016/j.jconrel.2018.05.007. [ DOI ] [ PubMed ] [ Google Scholar ]
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.