What Is Silica Powder? Types, Particle Sizes, Grades and Common Applications

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is TEOS? Uses in Sol-Gel Silica, Coatings and Semiconductors
  • Keywords: silica D50
  • Published: 2026-11-20 02:02:00
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

What Is Silica Sand? Composition, Grades, Mesh Sizes and Industrial Uses

Colloidal Silicon Dioxide Excipient: Uses as a Glidant and Pharmacopeia Standards
During the applications of noble metal NPs/MSNs nanocomposites, the corresponding noble metal factors can be properly selected and the aforementioned nanostructured architectures (Types I-V) or some new architectures can be rationally designed, according to the performance requirements and various therapeutic scenarios. For instance, Au NPs are a promising photothermal agent due to their unique localized surface plasmon resonance (LSPR), but the bare Au NPs are not sufficiently stable during light irradiation, and suffer from poor colloidal stability under physiological conditions. To address this issue, a silica-protection strategy was developed, as reported by Duan et al., they coated mesoporous silica shell onto the surface of gold nanorods, and in the meantime additional gold nanoclusters were also incorporated on the surface of the mesoporous silica shell. The resulting core-shelled Au NP/MSNs nanocomposites (Type I architecture) achieved a photothermal conversion efficiency of 77.6%, considerably higher than that of bare gold nanorods. 146 To overcome the cancer multidrug resistance (MDR) and enhance the penetration efficiency of nanomedicines, Kankala et al. designed a zinc metal species modified MSNs nanocarrier (Zn-MSNs), which could effectively disperse ultra-small Pt NPs, and the silica framework structure substantially promoted the loading efficiency of doxorubicin (DOX) (Type II architecture). During treatment, the ultra-small Pt NPs were able to penetrate deep into the tumor under the stimulation of acidic condition, and exhibited the peroxidase-like activity, decomposing hydrogen peroxide (H 2 O 2 ) into toxic hydroxyl radicals (•OH) to kill tumor cells. Importantly, these consequences of the synergistic ablation of MDR cells by ultra-small Pt NPs were favorable only in the presence of the free radical generator, DOX. 147 In addition, to design nanocomposites with high intelligence, e.g., in response to environmental stimuli or with self-propelling characteristic, the nanocomposites, asymmetric Janus-type nanostructures, have been created. Janus Ag/MSNs with SPR impact for pH-responsive drug delivery and SERS imaging, 139 Janus Au/MSNs with the radiation absorption and SPR properties for CT and PA imaging of tumor, 148, 149 and Janus Pt/MSNs as an ultrafast self-propelled motion for smart drug delivery, 150 have been reported successively.
Silicon Dioxide Chemical Properties: Reactivity, Stability and Key Reactions
What Is Hydrophilic Fumed Silica? Properties, BET Grades and Typical Uses
Generally speaking, MSNs are often manufactured via surfactant-templating sol-gel method. Their structure and morphology are influenced by different factors, i.e., surfactants, silica sources, reaction catalysts, and other external reaction conditions such as pH and temperature. 62, 63, 64 Of these, the surfactants as the structure-directing agents play a crucial part in determining the mesoporous architectures of MSNs, since they can induce the micellization of foam during the reaction process. 65 Three main categories of structure-directing agents are frequently used in the synthesis of MSNs, including cationic surfactants (e.g., CTAB and cetyltrimethylammonium chloride (CTAC)), anionic surfactants (e.g., phosphoric acid, sodium dodecyl sulfate, and alkyl carboxylic acid), and non-ionic surfactants (Pluronic F123, F127, polyethylene oxide (PEO) and polypropylene oxide (PPO)). 66 Because of the diversity of surfactants, diverse MSNs with distinctive configurations have been created and received phenomenal attention from researchers. Presently, MSNs can be divided into M41S-series, SBA-series, Fudan University (FDU)-series, and Korea Institute of Technology (KIT)-series, etc, according to the mesoporous materials family. Table 1 summarizes some of the more well-studied types of MSNs. These different families of mesoporous silicas are detailed as follows.
Amorphous vs Crystalline Silica: Structure, Safety and Uses Compared

Semiconductor Grade Silica: Purity Standards, Key Specs and Typical Uses

What is silica (SiO₂)?

fumed silica vs precipitated silica Silica possesses tetrahedral framework structure, which consists of a silicon atom and four oxygen atoms formed by covalent bonding. Mesoporous silica is a class of porous materials with the pore size distribution of 2-50 nm. In the preparation process of mesoporous silica, soluble silica precursors can be gathered into liquid-crystalline mesophases by adding the block copolymers or amphiphilic surfactants as the structure-directing agents. 29, 41 The silanes condensation followed by the structure-directing agents removal utilizing solvent extraction or calcination approaches results in the synthesis of amorphous mesoporous silica with different mesoporous phases (e.g., hexagonal, cubic, lamellar, and disordered structures). 42 Research on mesoporous silica dates back to the 1960s, when some United States patents noted the preparation of mesoporous silica, 43, 44 but it was not until the 1990s that the study of mesoporous silica obtained increasing attention from researchers. In 1992, scientists from the Mobil Research and Expansion Corporation first synthesized a novel mesoporous material, Mobil Composition of Matter No. 41 (MCM-41), which is one member of the family of silicate-based mesoporous molecular sieves (M41S). 45 MCM-41 exhibits an ordered hexagonal arrangement of uniform mesopores, and the channels of MCM-41 can be tailored in the range of 1.5-10 nm in size. 46 In general, MCM-41 is prepared by employing cetyltrimethylammonium bromide (CTAB) as the surfactant and Tetraethyl orthosilicate (TEOS) as the silica source (Fig. 2 ). Under strong alkaline condition, the surfactant initially forms micellar rods, and then stacks and arranges in hexagonal arrays. After adding the TEOS, the silicate in solution covers the hexagonal arrays to produce inorganic structure, in which the electrostatic interaction between negatively charged Si-O - and positively charged -N + (CH 3 ) 3 results in the hydrolysis and condensation of silanes. Later, the calcination treatment results in the removal of surfactant template to give the final product. 46 At present, MCM-41 has become the most common nanomaterial used to construct biomedical nanoplatforms.

What is the difference between fumed silica and precipitated silica?

silica carrier for pesticides For metal sulfide NPs/MSNs nanocomposites, the small-sized CdS NPs as a gatekeeper is the first example of MSNs-based therapeutic system for controlled drug delivery, reported in 2003. 51 Other metal sulfides such as copper sulfide (CuS), molybdenum disulfide (MoS 2 ) and bismuth sulfide (Bi 2 S 3 ) exhibit high NIR absorption coefficients in the NIR region owing to their plasmon resonance effect or electron-hole generation and relaxation mechanism, 182, 183, 184, 185, 186 and consequently those metal sulfides NPs can serve as potential photothermal agents. For instance, hollow MSNs functionalized with chitosan were synthesized, and then loaded with CuS nanodots. The CuS nanodots could act as a gatekeeper to seal the surface pores of MSNs, leading to the controllable release of DOX. The as-resulted CuS/MSNs-based therapeutic nanoplatform, with the photothermal conversion efficiency being 36.4%, dramatically extended the survival rate of tumor-bearing mice by the photothermal-enhanced synergistic therapy. 162 Similarly, in another study, the MoS 2 nanosheets with brilliant photothermal conversion capacity were also used as a capping agent to block MSNs to realize the drug release. Experimental results demonstrated that the MoS 2 /MSNs nanocomposite has the capability of pH-dependent and photothermal-triggered DOX release, consequently achieving the targeted tumor killing by the combination of chemotherapy and PTT. 187

What drives silica raw material prices?

silicon oxide

Cite this article: Silica Raw Materials News. "What Is Highly Dispersible Silica (HDS)? Benefits for Tire Performance Explained ." Published 2026-11-20 02:02:00. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.