Silica for Tires: How It Reduces Rolling Resistance and Improves Wet Grip

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Is Silicon Dioxide Toxic? Safety of Amorphous vs Crystalline Forms Explained
  • Keywords: quartz powder
  • Published: 2026-11-20 01:20:02
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
where M t is the volume of drug released at time t; M 0 is the opening amount of drug; D is the diffusion coefficient in the matrix; and h is the thickness of the system.

What Is Precipitated Silica? Production Process, Properties and Main Applications

Silica as an Anti-Caking Agent: How It Works and Where It Is Used
Silica for Skincare: Benefits for Oil Control, Texture and Soft-Focus Effects
Matting Agent for Coatings: Types, Selection Guide and Performance Comparison
Silica for Beer Clarification: How Silica Gel Improves Beer Stability
Got 2025 Aug 17; Revised 2025 Sep 15; Accepted 2025 Sep 15; Collection date 2025 Sep.

Imerys Silica: Product Range, Minerals and Applications

What is silica (SiO₂)?

silica factory In the other case, the adsorption capacity of the carriers decreases owing to granulation, which can impair the absorption of the molecules, since the binder can cover the surface of the pores or fill the channels [ 105, 107 ]. To conclude, the optimization of the granulation process is necessary for the drug-carrier complex used. Dry granulation cannot be used as a granulation technique for such carriers, as high compression forces can damage the pore structure [ 98 ].

What is the difference between fumed silica and precipitated silica?

quartz CAS 14808-60-7 The physicochemical characteristics of SNPs have a substantial impact on pharmacokinetics, thus influencing distribution, accumulation in various cells, degradation, and elimination from the body [ 1, 10 ]. It is also known that the particle size, particle morphology, pore structure, and surface properties are mainly to blame for possible toxicity, so ultimately also for the effectiveness of the therapy [ 10 ]. Additionally, the adsorption of molecules into the pores can also be influenced by tailoring these properties [ 1, 12 ]. The parameters of the particles can be changed within a wide range and can be customized according to the wishes [ 10, 12 ]. The conditions of the synthesis can exactly tune and reproduce the particle size, particle shape, or pore structure, which can make drug formulation and therapy more effective [ 1, 10 ]. Understanding the physicochemical properties of nanoparticles is key to achieve more effective treatment. The most important articles covered in this section are included in Table 1.

What drives silica raw material prices?

silica melting point In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].

Cite this article: Silica Raw Materials News. "Scratch Resistant Silica: How It Improves Coating Hardness and Durability ." Published 2026-11-20 01:20:02. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.