Silica for Thermal Insulation: Aerogel, Fumed Silica and Microporous Materials Compared

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is TEOS? Uses in Sol-Gel Silica, Coatings and Semiconductors
  • Keywords: silica gel beads
  • Published: 2026-11-20 11:55:15
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Silica for Rubber: Reinforcement Benefits, Grades and Compounding Tips

Silica Aerogel Blanket: Thermal Conductivity, Thickness Options and Insulation Uses
Best Silica Supplier: How to Choose in 2026 (Checklist and Comparison Criteria)
Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].
Silica Factory: How Silica Is Produced and What to Check During a Factory Audit
Silicon Metal vs Silica: Production Process and Key Differences

What Is Silica Sand? Composition, Grades, Mesh Sizes and Industrial Uses

What is silica (SiO₂)?

precipitated silica supplier

What is the difference between fumed silica and precipitated silica?

2500 mesh silica 11. Ortiz A.C., Jackson N., Buelvas N., Jerez A., López-Muñoz R.A., Morales J., Arriagada F. Release kinetics approach of stimuli-responsive mesoporous silica nanocarriers: pH-sensitive linker versus pH-sensitive framework. J. Drug Deliv. Sci. Technol. 2024;91:105212. doi: 10.1016/j.jddst.2023.105212. [ DOI ] [ Google Scholar ]

What drives silica raw material prices?

colloidal silicon dioxide excipient MSNs are SiO 2 nanoparticles [ 2 ] with a pore diameter between 2 and 50 nm [ 3, 4 ] and with a total diameter of a maximum of 1 µm. Their use in drug delivery dates to the early 1990s when they were synthesized for various scientific applications [ 5 ]. The material known as mesoporous silica was discovered by Mobil Oil Corporation in 1992 [ 6 ]. Their first drug delivery application was demonstrated in 2001 when MCM-41 silica was used to release ibuprofen [ 7 ]. Since then, MSNs have become an increasingly popular drug delivery system due to their advantageous properties and have been typically recognized as secure (GRAS) by the FDA. Tiny SNPs have been approved for human clinical imaging studies, setting the stage for their use in clinical applications of drug delivery. The number of related research activities is continuously increasing each year, expanding their role in cancer treatment, gene delivery, and oral illness therapy [ 5 ]. Their pore size is located between microporous and macroporous systems. They can be used in diverse shapes (sphere, cube, ellipsoid, rod) and sizes, with different pore sizes and pore structures [ 2, 3, 4, 8, 9, 10 ]. They have a high degree of stability [ 8 ] and a rigid framework, which results in resistance to temperature, pH, enzymatic degradation, and mechanical force [ 4 ]. Thanks to the large number of pores, they have a massive particular surface region (approx. 700-1300 m 2 /g) and pore volume (approx. 0.5-1.5 cm 3 /g), which enables effective adsorption of diverse molecules [ 2, 3, 4, 8, 9, 10 ]. By changing the pore size distribution, the range of adsorbable molecules can be controlled [ 3 ], which also lets separation based on size exclusion, which means selective adsorption of molecules of certain sizes. Depending on the size of the pores, tiny molecules together with high molecular weight proteins can be transported into the pores [ 8 ]. In addition, chemical separation is also possible if the surface of the pores is coated with specific functional groups [ 4 ], which enables the separation of the APIs according to their structure [ 4 ]. Such modifications may include the setting of hydrophilicity/hydrophobicity of the surface, depending on whether the adsorption of hydrophobic or hydrophilic molecules is targeted [ 4 ]. By inserting different functional groups, the surface charge can also be controlled so that certain molecules will bind more efficiently. MSNs have a negative surface charge in biological environments, which promotes the electrostatic adsorption of positively charged APIs in the pores [ 10 ]. Moreover, the biological markers attached to the surface of the nanoparticles enable the drug-carrying system to deliver the API in a tissue-specific manner [ 2, 4, 8, 9, 10 ]. A substantial problem is the premature release of the API from the pores during transport [ 4, 8 ], which can be solved by utilizing gatekeepers that respond to special stimuli and keep the pores closed until the stimulus [ 2, 4, 8 ]. In this way, controlled drug delivery and stimuli-responsive release can be achieved [ 2, 4, 9 ]. The drug release could be triggered by temperature, pH, redox potential, light, enzymes, magnetic field, or different ligands [ 4, 8, 11 ].

Cite this article: Silica Raw Materials News. "What Is Fumed Silica? Production, Properties, Grades and Key Applications ." Published 2026-11-20 11:55:15. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.