Is Silicon Dioxide Safe? What Science and Regulators Say

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Amorphous vs Crystalline Silica: Structure, Safety and Uses Compared
  • Keywords: semiconductor grade silica
  • Published: 2026-11-20 02:35:05
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Thermal Conductive Filler: Silica vs Alumina vs Boron Nitride Compared

SiO₂ Explained: Chemical Formula, Structure, Properties and Applications of Silicon Dioxide
Cosmetic Grade Silica: Types, Benefits and Uses in Skincare and Makeup
Silica Stocks: Publicly Listed Silica and Quartz Companies to Know
In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].
Aerosil R972: Specifications, Hydrophobic Properties and Equivalent Grades
On The Bright Side

Fumed Silica Market 2026: Size, Growth, Key Players and Forecast

What is silica (SiO₂)?

silica 99.99%

What is the difference between fumed silica and precipitated silica?

Aerosil alternative 33. Zhang J., Dong Y., Liu X., Jin H., Wang S., An N., Wang L. Effective myocardial infarction treatment by targeted accumulation of Sulforaphane using porous magnetic silica nanoparticles. Int. J. Pharm. 2023;645:123389. doi: 10.1016/j.ijpharm.2023.123389. [ DOI ] [ PubMed ] [ Google Scholar ]

What drives silica raw material prices?

precipitated silica price

Cite this article: Silica Raw Materials News. "What Is Synthetic Amorphous Silica (SAS)? Types, Safety and Regulatory Status ." Published 2026-11-20 02:35:05. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.