Aerosil R972: Specifications, Hydrophobic Properties and Equivalent Grades

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: HDK N20: Specifications, Applications and Equivalent Grades
  • Keywords: silica gel manufacturer
  • Published: 2026-11-20 08:08:10
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
The skin is our largest organ, which consists of three layers: the epidermis, dermis, and hypodermis. Owing to its big surface zone, it also serves as an essential gateway for drug administration [ 25 ], which is fitting for both local (dermal) or systemic (transdermal) therapy [ 25, 56 ]. In spite of the popularity of this administration route, it is a challenge to get the API into deeper layers of the skin. The outermost layer of the epidermis, the stratum corneum, is the biggest hurdle to molecular penetration [ 25, 56 ]. However, the molecules must be absorbed through the capillaries of the dermis to achieve a systemic impact, which can be facilitated employing nanocarriers [ 56 ]. In addition, sweat glands or hair follicles can be effective alternative routes for the molecules to enter the deeper layers of the skin [ 25, 56 ]. In summary, it can be called as the transappendageal route. Among physicochemical properties, particle size is one of the most vital factors influencing absorption. Particles in the range between 200 and 300 nm are suitable for local treatment of the skin in diseases such as atopic dermatitis [ 25 ] since particles larger than 75 nm do not pass through the stratum corneum [ 25 ]. Smaller particles (approximately 50 nm) are suitable for systemic treatment [ 25 ], and on the whole, it can be said that nanoparticles with a diameter smaller than 25 nm can penetrate the skin most effectively, so they can be used for transdermal drug administration with an appropriate formulation [ 56 ]. By controlling the size of the nanocarrier, they penetrate to different depths in the skin. From the element of surface characteristics, cationic amino-functionalized MSNs show more efficient penetration into deeper layers of the skin than the particles with anionic surfaces of the same size [ 25 ]. The use of MSNs as a drug carrier may improve aqueous solubility, stability, and skin penetration of the drug [ 61 ]. In a research, gels containing MSN were prepared by employing distilled water to form the base, adding the gelling agent (Poloxamer 407), and adding HPMC to enhance the viscosity [ 83 ]. In another publication, MSN containing oleogels were prepared with sunflower oil and the addition of colloidal silicon dioxide as a gelling agent [ 61 ]. According to in vitro experiments, the gel matrix also affected the drug release kinetics [ 61, 83 ]. Slower drug release was observed in the case of gels containing loaded MSNs, compared to the free carriers, and the outcomes demonstrated close to zero-order release kinetics [ 61 ]. According to in vitro biocompatibility studies, this gel complex did not show any evidence of cytotoxicity on dermal fibroblast cells. Moreover, according to in vivo dermal safety studies, it has been proven that this preparation does not cause skin irritation during application, and so this formulation can be considered a safe product [ 61 ].

Spherical Silica Market 2026: Semiconductor Packaging Demand and Growth Outlook

Pharmaceutical Grade Silica: Specifications, USP/EP Standards and Uses as an Excipient
38. Kheirkhah S., Abedi M., Zare F., Salmanpour M., Abolmaali S.S., Tamaddon A.M. Surface engineered palmitoyl-mesoporous silica nanoparticles with supported lipid bilayer coatings for high-capacity loading and prolonged release of dexamethasone: A factorial design approach. J. Drug Deliv. Sci. Technol. 2022;78:103943. doi: 10.1016/j.jddst.2022.103943. [ DOI ] [ Google Scholar ]
Silica Aerogel Powder: Properties, Applications and How It Compares to Other Insulators
Spherical Alumina vs Spherical Silica: Thermal Fillers Compared
Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].
Wood Coating Matting Agent: How to Achieve a Low-Gloss, Clear Finish

What Is Silicosis? Causes, Symptoms, Prevention and Silica Exposure

What is silica (SiO₂)?

silica supplier Europe

What is the difference between fumed silica and precipitated silica?

calcium carbonate filler

What drives silica raw material prices?

5N quartz sand No new data were created or analyzed in this study. Data sharing is not applicable to this article.

Cite this article: Silica Raw Materials News. "Silica OEM: How Private-Label and Custom Silica Manufacturing Works ." Published 2026-11-20 08:08:10. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.