Silica Nanopowder: Particle Size, Specifications and Industrial Uses

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Microsilica for Cement: Benefits, Dosage Guidelines and Applications
  • Keywords: silica OEM
  • Published: 2026-11-20 03:58:17
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Covia Silica: Product Range, Industrial Sand and Applications

Wollastonite vs Silica: Filler Performance and Applications Compared
Silica Filler for Plastics: Benefits, Grades and Applications
Wet granulation is the most frequently used technique to process MSNs, because of the many possibilities inherent in it [ 106 ]. Conventional wet granulation is well-suited for the granulation of silica nanocarriers, but several things should be considered during implementation. There are two possible sequences: first, the drug loading, followed by the granulation of the loaded carriers [ 104 ], or the opposite way, the granulation of the empty carriers, then loading the drug into the prepared granules. In the first case, during the planning and implementation of the process, special attention must be paid to the critical process parameters to steer clear of premature drug release [ 104 ]. In general, it can be noted that as little moisture as possible should be used during granulation, consequently decreasing the risk of premature drug release. Still, simultaneously, moisture adequate to produce the desired agglomeration must be made sure [ 104 ]. The risk of premature drug release depends to a certain extent on the chemical structure of the API and the carrier. Szewczyk and Prokopowicz developed doxycycline-loaded MSN pellets with prolonged release kinetics [ 40 ]. First, the drug was loaded into the pores, and then pellets were produced from the loaded mesoporous material with other excipients by wet extrusion and spheronization. For comparison, traditional doxycycline pellets were also prepared. This study demonstrated the importance of utilizing mesoporous carriers for the delayed or sustained release of water-soluble drugs. Pelletization was a successful method to reduce the initial burst release of doxycycline; twice the release time was observed compared to traditional pellets [ 40 ]. Szewczyk et al. developed another DDS loaded with an antibiotic compound (cefazolin) for the treatment of osteomyelitis [ 66 ]. The amine-functionalized MSN was successfully loaded with the drug, and because of the powerful interactions between the negatively charged cefazolin and the positively charged surface of the carrier, a prolonged release of 5 days was observed, which made sure a longer antibacterial influence than with classic pellets. This was proven by the microbiological activity assays of the pellets against S. aureus culture [ 66 ]. These results are promising in antibiotic or anticancer therapy, where therapeutic concentration is needed for a longer period [ 40, 66 ]. A comparable outcome was presented in another publication about metformin-containing MSN pellets with prolonged release kinetics [ 85 ]. After drug loading, pellets were formed with the mixture of the preloaded carriers and chitosan solution, and then the pellets were coated with five layers of chitosan. Since the stomach is not considered the best possible absorption surface for metformin, it is advisable to delay the release until conditions in the intestines are ideal for maximum bioavailability. Chitosan plays an important role in this formulation; it slows down and delays the metformin release and offers delayed and prolonged release kinetics, thereby preventing speedy blood level peaks after application [ 85 ]. On the contrary, Wang et al. published a post on MSN pellets filled with poorly water-soluble carbamazepine, and they observed better oral bioavailability compared to commercially available tablets based on in vivo analysis performed on dogs [ 86 ]. In vitro dissolution studies confirmed a raised dissolution rate compared to crystalline carbamazepine due to the amorphous state of the drug within the pores. This immediate-release pellet formulation allows for a reduction in the drug dose, sustaining the same clinical influence [ 86 ].
Silica Supplier UAE: How to Source Silica for the UAE and GCC Markets
40. Szewczyk A., Prokopowicz M. Mesoporous silica pellets - A promising oral drug delivery system? J. Drug Deliv. Sci. Technol. 2020;56:101491. doi: 10.1016/j.jddst.2019.101491. [ DOI ] [ Google Scholar ]
Calcium Carbonate Filler vs Silica: Performance, Cost and Applications Compared
11. Ortiz A.C., Jackson N., Buelvas N., Jerez A., López-Muñoz R.A., Morales J., Arriagada F. Release kinetics approach of stimuli-responsive mesoporous silica nanocarriers: pH-sensitive linker versus pH-sensitive framework. J. Drug Deliv. Sci. Technol. 2024;91:105212. doi: 10.1016/j.jddst.2023.105212. [ DOI ] [ Google Scholar ]

Foundry Silica Sand: AFS Grain Fineness, Specifications and Uses

What is silica (SiO₂)?

silica powder Malaysia To combat degradation and recrystallization, strategies such as surface functionalization with hydrophobic silanes, pore filling with polymeric co-formers, and selection of solvent-free loading methods (e.g., co-milling or melting) have been demonstrated to counteract water adsorption, increase drug-matrix interactions, and avoid solvent-templated polymorph formation. Tuning of pore size, surface chemistry, and loading processes allows MSNs to enable better long-term amorphous API stability and regulated polymorphism, thereby facilitating enhanced performance of nanoparticulate drug delivery systems.

What is the difference between fumed silica and precipitated silica?

green tire silica

What drives silica raw material prices?

quartz sand shortage In the case of solvent-free processes, the main advantage is that it is not necessary to get rid of the solvent residue from the system at the conclusion of the process, and the concentration of the API can also be controlled [ 36, 37 ]. Techniques employed in this class comprise physical mixing, co-milling, and melt sorption methods. The simplest approach is physical mixing [ 37 ], where fast drug filling is possible without special equipment. During direct mixing of the mesoporous carrier and the drug, the silanol groups on the surface of the silica bind the drug molecules. Nonetheless, its application is limited because it can be used largely for water-soluble molecules [ 37, 56 ]. Another method is co-milling, during which the mixture of the API and the nanocarrier is milled together [ 36, 37, 56 ]. In the case of the melt sorption method, the mixture of the API and the carrier system is heated above the melting point of the API under continuous stirring, while the melt is absorbed into the pores [ 36, 37 ]. After that, the system is cooled under lowered pressure, so that the molecules will be in an amorphous state in the pores [ 36, 37 ]. Nevertheless, this technique cannot be used in the case of heat-sensitive materials, due to the considerable thermal decomposition [ 20 ]. Microwave radiation can also be used for melting [ 2, 36 ].

Cite this article: Silica Raw Materials News. "Silica Supplier Vietnam: Market Overview and Sourcing Options ." Published 2026-11-20 03:58:17. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.