Cabot Cab-O-Sil: Product Range, Key Grades and Alternatives

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Fumed Silica 200 m²/g: Properties, Typical Uses and Comparable Grades
  • Keywords:
  • Published: 2026-11-20 02:21:58
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Silica Supplier Russia: Market Overview and Sourcing Considerations

Silica Nanoparticles: Synthesis, Properties, Safety and Applications
Buying Silica on Alibaba: How to Verify Suppliers and Avoid Common Risks
49. Dwyer L.M., Michaelis V.K., O'Mahony M., Griffin R.G., Myerson A.S. Confined crystallization of fenofibrate in nanoporous silica. CrystEngComm. 2015;17:7922-7929. doi: 10.1039/C5CE01148E. [ DOI ] [ PMC free post ] [ PubMed ] [ Google Scholar ]
Aerosil 200: Specifications, Applications and Equivalent Fumed Silica Grades
Silica Bulk Density: Typical Values by Type and Why It Matters for Handling
Tablets are the most used solid dosage form because of their numerous perks. They are characterized by excellent physical and chemical stability, high patient compliance, and productive economic production [ 92 ]. The incorporation of silica nanocarriers in tablet production presents a modern and innovative solution to diverse hurdles, boosting both the manufacturing process and therapeutic effectiveness. One of the considerable benefits of mesoporous silica carriers is their ability to stabilize the API in an amorphous state, which greatly improves its solubility [ 30, 39, 42, 43, 92 ]. This enhancement brings about a considerable increase in the dissolution rate of tablets, thereby improving bioavailability and resulting in more effective therapy [ 30, 39, 42, 92 ]. Furthermore, nanocarriers can effectively mask the bitter taste and unpleasant odor of the API, potentially further boosting patient compliance [ 42, 93 ]. Zhang et al. observed a considerable improvement in oral bioavailability with Telmisartan-loaded MSN carriers in vivo absorption studies conducted on dogs [ 24 ]. This MSN-containing tablet formulation was compared to commercially available tablets, with notable improvements attributed chiefly to the boosted permeability and solubility provided by the nanocarriers [ 24 ]. Moreover, the physical and chemical stability of the API may also improve, which is especially advantageous for sensitive molecules [ 39, 92 ].

What Is Fused Quartz? Properties, Manufacturing Process and Applications

What is silica (SiO₂)?

fumed silica In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].

What is the difference between fumed silica and precipitated silica?

silicon dioxide physical properties Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].

What drives silica raw material prices?

silica for LED encapsulant

Cite this article: Silica Raw Materials News. "Does Silicon Dioxide Conduct Electricity? Why SiO₂ Is an Insulator ." Published 2026-11-20 02:21:58. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.