Kaolin vs Silica: Filler Properties, Uses and Selection Guide

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silica Oil Absorption: What It Means, Typical Values and How It Affects Formulations
  • Keywords: what is silica
  • Published: 2026-11-20 09:29:51
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Precipitated silica is a synthetic amorphous silica made by reacting a sodium silicate solution with an acid, usually sulfuric acid. After precipitation, the silica is filtered, washed, dried and milled or granulated. Precipitated silica is generally cheaper to produce than fumed silica and is made in very large volumes. By controlling temperature, pH, concentration and mixing, manufacturers can tune particle size, surface area and porosity. Surface areas commonly range from below 50 to more than 200 m2/g, depending on the grade.

Silica for Silicone Rubber: Fumed vs Precipitated Silica and Grade Selection

What Is a Low CTE Filler? Why Fused and Spherical Silica Are Preferred
1250 Mesh Silica: Particle Size, Specifications and Common Applications
Silica vs Silicone: Key Differences in Structure, Properties and Uses
The Role of Colloidal Silica
Nouryon Levasil: Colloidal Silica Product Range and Applications
The Environmental Profile of Silica Aerogel

Silica for Coatings: Types, Functions and How to Choose the Right Grade

What is silica (SiO₂)?

modified silica Silicon dioxide is an excellent electrical insulator, with a band gap of roughly 9 eV. Thin SiO2 films can withstand very high electric fields before they break down. Its dielectric constant is about 3.9, a reference value in microelectronics against which other dielectrics are compared.

What is the difference between fumed silica and precipitated silica?

silicon dioxide chemical properties

What drives silica raw material prices?

calcium carbonate filler Fused silica, sometimes called fused quartz, is a non-crystalline glass made almost entirely of SiO2. Its coefficient of thermal expansion is very low, about 0.55 × 10^-6 per kelvin, so it withstands extreme thermal shock. Its density is about 2.2 g/cm3, lower than that of quartz, because its amorphous network is more open. It is produced by melting high-purity quartz or by depositing synthetic silica from chemical precursors such as silicon tetrachloride. Fused silica transmits light from the deep ultraviolet to the near infrared, and synthetic grades can be extremely pure.

Cite this article: Silica Raw Materials News. "What Is the Dielectric Constant of Silica? Values and Importance in Electronics ." Published 2026-11-20 09:29:51. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.