Fumed Silica Alternatives: Cost-Effective Substitutes and How They Compare

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Ultrafine Silica Powder: Particle Sizes, Specifications and Applications
  • Keywords: colloidal silicon dioxide excipient
  • Published: 2026-11-20 07:41:30
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Toothpaste Grade Silica: Abrasive vs Thickening Silica, RDA Values and Specifications

Silica Nanopowder: Particle Size, Specifications and Industrial Uses
Physical and polymorphic stability also depend on the way of loading. Prednisolone underwent a polymorphic transformation from form I to form II within pores when it was loaded into MSNs with the solvent-evaporation approach, whereas melt-loading retained the original polymorph. This means that contacts between the solvent, API, and silica, and the presence of residual solvent can template some polymorphic structures. Furthermore, confinement within thin channels stabilizes metastable polymorphs that would otherwise really swiftly convert into the thermodynamically stable polymorph in the bulk. This offers an opportunity to selectively stabilize desired polymorphs by pore size [ 48 ]. Dwyer et al. showed that confinement in nanopores is capable of stabilizing metastable polymorphs or even forming new polymorphs not accessible in the bulk. For instance, fenofibrate crystallized in favored metastable states during confinement in mesoporous matrices, while other APIs formed nanoscale crystals of different thermodynamic properties. The above findings show that MSNs are not only stabilizers but also nanocrystallization chambers that can govern polymorphic selection and routes [ 49 ].
Silica Microspheres: Sizes, Properties and Applications in Coatings, Cosmetics and Chromatography
What Is Surface Treated Silica? Treatment Methods, Benefits and Applications
What Is Silica Sol? Composition, Acidic vs Alkaline Types and Industrial Applications
In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].

Silica Supplier Thailand: Market Overview and Sourcing Options

What is silica (SiO₂)?

silica aerogel powder

What is the difference between fumed silica and precipitated silica?

CMP slurry silica What is Diatomaceous Earth?

What drives silica raw material prices?

what is silicon dioxide

Cite this article: Silica Raw Materials News. "Silica for Thermal Insulation: Aerogel, Fumed Silica and Microporous Materials Compared ." Published 2026-11-20 07:41:30. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.