What Is Silica Sand? Composition, Grades, Mesh Sizes and Industrial Uses

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silica Testing Methods: How to Test Purity, Particle Size, BET and Moisture
  • Keywords: silica vs silicon
  • Published: 2026-11-20 01:27:11
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Silica for Epoxy Molding Compound (EMC): Spherical Silica Specs and Selection

Novoray: Company Overview, Spherical Silica Products and Applications
4. Drug Loading
Silica for Powder Coatings: Flow Aid, Matting and Anti-Caking Functions
To reduce or steer clear of the liquid used, it is possible to use other granulation techniques instead of the traditional wet granulation: either steam granulation or melt granulation, which decreases the risk of premature drug release compared to traditional wet granulation [ 98, 106, 108 ]. During steam granulation, steam is used rather than liquid water; it can be used with or without a binder. The steam shows a more uniform distribution than the atomization of the liquid; therefore, more regular granules are formed [ 98, 108 ]. The removal of water at the conclusion of granulation can be accomplished more quickly; a shorter process time is to be expected, so it is also an energy-efficient method.
What Is Fumed Silica? Production, Properties, Grades and Key Applications
The carriers can have ordered and disordered pore structures [ 1, 2 ]. The ordered mesopores have a regular, homogeneous pore structure and a tunable internal frame, which permits the optimization of the API formulation, while the disordered ones have a random distribution of pore structure. Pores can be divided into two chief groups according to their geometry. There are open and closed pores, based on whether the pore is accessible to the medium or not. In the case of open pores, further differentiation is also possible. Blind pores are only accessible from one direction, while through pores are accessible from at least two directions [ 3 ]. The arrangement of the pores can also be defined and changed, hence the kinetics and dynamics of the release of the API can be influenced and regulated [ 1 ]. Laminar (tubular), radial, hexagonal, or cubic arrangements can also be created [ 1 ]. It is well known that the pore size significantly affects drug loading and drug release [ 1, 3 ]. Nonetheless, the literature is not crystal clear regarding correlation [ 14 ]. Some studies show proof that larger pores provide faster drug release [ 15, 16, 26 ], and larger pores have demonstrated a faster degradation rate in the lymph nodes [ 15 ], and reports limited release for smaller pores as they limit the diffusion process, which is called the steric hindrance influence [ 16, 26 ]. Nevertheless, in other publications, proof recommends that larger pores facilitate slower drug release, as the drug is loaded and trapped in deeper channels, requiring a longer access time for the release medium [ 14 ]. In general, the adsorption capacity can indeed be increased by increasing the specific surface area of the carrier and by decreasing the pore diameter [ 17 ].
Silicon Nitride vs Silicon Dioxide: Properties and Applications Compared

What Is Hydrophobic Fumed Silica? Surface Treatment, Grades and Applications

What is silica (SiO₂)?

hydrophilic silica

What is the difference between fumed silica and precipitated silica?

Cab-O-Sil alternative Nevertheless, mesoporous carriers are frequently associated with poor tabletability because of bad powder flow behavior; thus, direct tableting can only be attained by adding diverse excipients in large quantities [ 95 ]. Such useful excipients include microcrystalline cellulose (filler), lactose monohydrate (filler), PVP (binder), sodium carboxymethylcellulose (disintegrant), croscarmellose sodium (super disintegrant), colloidal silica (anti-adhesion material), magnesium stearate (lubricant), and talc (lubricant) [ 39, 95, 96, 97 ]. However, the drug content in the dosage unit decreases with high amounts of excipients added, so larger tablets must be designed to attain the proper dose [ 95 ]. Another issue is that the greater compression force used during tableting may deform and damage the pore structure of the carrier, which might decrease the expected drug release rate [ 36, 97, 98 ]. When higher compression forces are applied, the pore diameter decreases, which affects both total pore volume and particular surface region, reducing the drug release rate from the carrier [ 97, 98 ]. The use of microcrystalline cellulose may be a solution to this problem, as it deforms plastically under pressure while distributing the energy accumulated in the tablet during compression. Furthermore, croscarmellose sodium may improve the drug release rate [ 97, 98 ]. Granulation of mesoporous material is a proper choice to solve issues related to poor powder rheology.

What drives silica raw material prices?

5. Drug Release

Cite this article: Silica Raw Materials News. "Rubber Grade Silica: Specifications, BET Ranges and How to Choose for Rubber Compounds ." Published 2026-11-20 01:27:11. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.