Silicon Dioxide in Food: Why It Is Added and Whether It Is Safe

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Matting Agent for Coatings: Types, Selection Guide and Performance Comparison
  • Keywords: silica sand for glass
  • Published: 2026-11-20 02:42:40
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Data Availability Statement

CMP Slurry Silica: Colloidal vs Fumed Silica for Chemical Mechanical Polishing

High Purity Quartz Market 2026: Supply, Demand and Price Outlook
Associated Data
Silica Surface Area Explained: Typical BET Values by Type and Why It Matters
Silica as an Adsorbent: How It Works and Common Applications
It is necessary to grasp the drug release mechanisms in porous media. Three categories can be distinguished based on the driving forces that generate mass transport: advection, diffusion, and electrophoresis [ 3 ]. For nanocarriers, advection and diffusion are the most considerable types. In the case of advection, the liquid as a medium conducts the material transport. This fluid motion is ensured by mechanical forces (pressure, gravity, cohesive and adhesive forces) [ 3 ]. Additionally, three subcategories can be distinguished here: film flow, capillary flow, and permeation. In the case of film flow, the liquid spreads into a thin liquid layer in contact with the surface of the pores. This spreading produces the required flow pattern. Capillary flow is made sure by capillary action. The surface tension of the liquid and the combined impact of adhesive and cohesive forces contribute to its creation. The pressure difference across the meniscus in the capillary causes the movement of the liquid along the capillary. During permeation, the flow of the liquid through the pores was created with the help of an external driving force (pressure) rather than an internal one [ 3 ]. Another significant material flow category is diffusion [ 2, 57 ]. The driving force comes from the concentration difference, which is equalized by the Brownian motion of the particles [ 3 ].
Silica Thermal Expansion Coefficient: CTE Values for Quartz vs Fused Silica
Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].

Spherical Silica Powder: Specifications, Particle Sizes and How to Choose the Right Grade

What is silica (SiO₂)?

silica matting agent In the case of solvent-free processes, the main advantage is that it is not necessary to get rid of the solvent residue from the system at the conclusion of the process, and the concentration of the API can also be controlled [ 36, 37 ]. Techniques employed in this class comprise physical mixing, co-milling, and melt sorption methods. The simplest approach is physical mixing [ 37 ], where fast drug filling is possible without special equipment. During direct mixing of the mesoporous carrier and the drug, the silanol groups on the surface of the silica bind the drug molecules. Nonetheless, its application is limited because it can be used largely for water-soluble molecules [ 37, 56 ]. Another method is co-milling, during which the mixture of the API and the nanocarrier is milled together [ 36, 37, 56 ]. In the case of the melt sorption method, the mixture of the API and the carrier system is heated above the melting point of the API under continuous stirring, while the melt is absorbed into the pores [ 36, 37 ]. After that, the system is cooled under lowered pressure, so that the molecules will be in an amorphous state in the pores [ 36, 37 ]. Nevertheless, this technique cannot be used in the case of heat-sensitive materials, due to the considerable thermal decomposition [ 20 ]. Microwave radiation can also be used for melting [ 2, 36 ].

What is the difference between fumed silica and precipitated silica?

silica for skincare

What drives silica raw material prices?

silica for electronic encapsulation

Cite this article: Silica Raw Materials News. "Is Silicon Dioxide Toxic? Safety of Amorphous vs Crystalline Forms Explained ." Published 2026-11-20 02:42:40. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.