Silica pH Value: Typical pH by Silica Type and Why It Matters

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silica Supplier Germany: Leading Producers and Sourcing Considerations
  • Keywords: microsilica
  • Published: 2026-11-20 12:03:52
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
To reduce or steer clear of the liquid used, it is possible to use other granulation techniques instead of the traditional wet granulation: either steam granulation or melt granulation, which decreases the risk of premature drug release compared to traditional wet granulation [ 98, 106, 108 ]. During steam granulation, steam is used rather than liquid water; it can be used with or without a binder. The steam shows a more uniform distribution than the atomization of the liquid; therefore, more regular granules are formed [ 98, 108 ]. The removal of water at the conclusion of granulation can be accomplished more quickly; a shorter process time is to be expected, so it is also an energy-efficient method.

What Is Silica Sand? Composition, Grades, Mesh Sizes and Industrial Uses

Is Silica in Toothpaste Safe? Abrasiveness, Enamel Effects and Safety
Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].
What Is Tetraethyl Orthosilicate? Properties, Uses and Role in Silica Synthesis
Polysilicon vs Silica: From Quartz Sand to Solar-Grade Silicon
Angular Silica Powder: Properties, Uses and When to Choose It Over Spherical Silica
Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].

What Is Hydrophobic Fumed Silica? Surface Treatment, Grades and Applications

What is silica (SiO₂)?

silica microspheres 83. Shendge R.S., Dimote R.K. Formulation and optimization of mesoporous silica loaded gel containing extract of Rosmarinus officinalis for treatment of acute wound healing. Eur. J. Med. Chem. Rep. 2024;11:100155. doi: 10.1016/j.ejmcr.2024.100155. [ DOI ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

silica exporter According to some articles, the API is released from the pores according to first-order kinetics [ 2, 57 ], but some experiments propose that the release profile follows the Higuchi model [ 16, 58 ], while other experiments recommend that the Korsmeyer-Peppas model clarifies the drug release rate most accurately [ 21, 22 ].

What drives silica raw material prices?

highly dispersible silica 81. Yusuf A., Almotairy A.R.Z., Henidi H., Alshehri O.Y., Aldughaim M.S. Nanoparticles as Drug Delivery Systems: A Review of the Implication of Nanoparticles' Physicochemical Properties on Responses in Biological Systems. Polymers. 2023;15:1596. doi: 10.3390/polym15071596. [ DOI ] [ PMC free piece ] [ PubMed ] [ Google Scholar ]

Cite this article: Silica Raw Materials News. "Fumed Silica 380 m²/g: Properties, Thickening Performance and Applications ." Published 2026-11-20 12:03:52. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.