📌 Key Takeaways
- Topic: How to Choose a Silica Supplier: Key Criteria, Certifications and Red Flags
- Keywords: silica carrier
- Published: 2026-11-20 03:53:32
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Silica 99.99% (4N): Specifications, Impurity Limits and Applications
- What Is Silica Fume? Properties, Specifications and Uses in High-Performance Concrete
- Kaolin vs Silica: Filler Properties, Uses and Selection Guide
- What Is a Low CTE Filler? Why Fused and Spherical Silica Are Preferred
- Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].
- What Is Hydrophilic Fumed Silica? Properties, BET Grades and Typical Uses
- By connecting different functional groups, smaller or larger changes can be observed in the surface charge (zeta potential values) and hydrophilicity/hydrophobicity of SNPs [ 14, 18 ]. Such functional groups can be, for instance, -NH 2, -PO 3, -SH, -COOH, and -CH 3 [ 14, 18 ]. By functionalizing the internal surface (pores), the drug loading and the stability of the molecules can be raised, the release kinetics can be influenced, and even controlled release can be created [ 2, 18, 27 ]. By functionalizing the outer surface, the stability and biocompatibility of the particles can be improved [ 2, 27 ]. The outer surface also affects the interactions with the cell membrane, cellular uptake, and penetration [ 2, 12, 18, 27, 28 ], and lets the creation of cell-specific targeted therapy [ 2, 27 ]. The hydrophilic/neutral surface favors permeability through the mucus hurdle, while the hydrophobic/cationic surface promotes penetration through epithelial cells [ 12, 18 ]. Cationic nanoparticles have a higher degree of internalization than anionic particles [ 18, 28 ]. Positively charged functional groups (-NH 2 ) can establish electrostatic interactions with the negatively charged cell membrane, leading to raised endocytosis compared to negatively charged groups (-SH) [ 18, 28 ]. SNPs also have permeation-enhancing properties as they can temporarily open epithelial tight junctions owing to their size and surface, thereby increasing the drug absorption [ 13, 14 ]. SNPs smaller than 200 nm with a negative surface charge have this property [ 13 ], while particles with a positive or neutral surface do not show similar effects [ 13 ].
Talc Powder vs Silica: Differences and Which Filler to Choose
What is silica (SiO₂)?
silica pH value On The Bright Side
What is the difference between fumed silica and precipitated silica?
silica for printing ink
What drives silica raw material prices?
matting agent for coatings In the other case, the adsorption capacity of the carriers decreases owing to granulation, which can impair the absorption of the molecules, since the binder can cover the surface of the pores or fill the channels [ 105, 107 ]. To conclude, the optimization of the granulation process is necessary for the drug-carrier complex used. Dry granulation cannot be used as a granulation technique for such carriers, as high compression forces can damage the pore structure [ 98 ].
Cite this article: Silica Raw Materials News. "What Is Fused Silica Sand? Properties and Uses in Investment Casting and Refractories
." Published 2026-11-20 03:53:32.
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.