Monocrystalline Silicon vs Silica: How Silicon Wafers Are Made from Quartz

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is the Molar Mass of Silicon Dioxide (SiO₂)? Calculation Explained
  • Keywords: mica powder
  • Published: 2026-11-20 14:32:52
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Fumed Silica Market 2026: Size, Growth, Key Players and Forecast

Silica Distributor vs Manufacturer: Which Is Better for Your Purchase?
Silica vs Quartz: Are They the Same? Differences Explained
Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].
Silica for Feed Carrier: How It Carries Vitamins and Liquids in Animal Feed
Silica 99% Purity: Specifications, Grades and Typical Applications

What Is Microsilica? Composition, Benefits and How It Improves Concrete Strength

What is silica (SiO₂)?

silica polishing slurry 58. Kinnari P., Mäkilä E., Heikkilä T., Salonen J., Hirvonen J., Santos H.A. Comparison of mesoporous silicon and non-ordered mesoporous silica materials as drug carriers for itraconazole. Int. J. Pharm. 2011;414:148-156. doi: 10.1016/j.ijpharm.2011.05.021. [ DOI ] [ PubMed ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

ultra pure silica

What drives silica raw material prices?

In the case of solvent-free processes, the main advantage is that it is not necessary to get rid of the solvent residue from the system at the conclusion of the process, and the concentration of the API can also be controlled [ 36, 37 ]. Techniques employed in this class comprise physical mixing, co-milling, and melt sorption methods. The simplest approach is physical mixing [ 37 ], where fast drug filling is possible without special equipment. During direct mixing of the mesoporous carrier and the drug, the silanol groups on the surface of the silica bind the drug molecules. Nonetheless, its application is limited because it can be used largely for water-soluble molecules [ 37, 56 ]. Another method is co-milling, during which the mixture of the API and the nanocarrier is milled together [ 36, 37, 56 ]. In the case of the melt sorption method, the mixture of the API and the carrier system is heated above the melting point of the API under continuous stirring, while the melt is absorbed into the pores [ 36, 37 ]. After that, the system is cooled under lowered pressure, so that the molecules will be in an amorphous state in the pores [ 36, 37 ]. Nevertheless, this technique cannot be used in the case of heat-sensitive materials, due to the considerable thermal decomposition [ 20 ]. Microwave radiation can also be used for melting [ 2, 36 ].

Cite this article: Silica Raw Materials News. "What Is Synthetic Amorphous Silica (SAS)? Types, Safety and Regulatory Status ." Published 2026-11-20 14:32:52. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.