Ultrafine Silica Powder: Particle Sizes, Specifications and Applications

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is Tetraethyl Orthosilicate? Properties, Uses and Role in Silica Synthesis
  • Keywords: crystalline silica dust hazard
  • Published: 2026-11-20 12:45:12
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Precipitated silica is a synthetic amorphous silica made by reacting a sodium silicate solution with an acid, usually sulfuric acid. Precipitated silica is generally cheaper to produce than fumed silica and is made in very large volumes. By controlling temperature, pH, concentration and mixing, manufacturers can tune particle size, surface area and porosity. After precipitation, the silica is filtered, washed, dried and milled or granulated. Surface areas commonly range from below 50 to more than 200 m2/g, depending on the grade.

Silica Factory: How Silica Is Produced and What to Check During a Factory Audit

Silica for 3D Printing: Uses in Resins, Powders and Binder Jetting
Silica Fume vs Silica Aerogel: Key Differences
Silica Specification Sheet: Key Parameters to Check Before Buying
--------------------
Custom Silica: Tailoring Particle Size, Surface Treatment and Purity to Your Application
What Is Silica Fume? Properties, Specifications and Uses in High-Performance Concrete
Specifications and Testing

What Is Amorphous Silica? Types, Safety Profile and Industrial Uses

What is silica (SiO₂)?

silica supplier Turkey Handling and Safety

What is the difference between fumed silica and precipitated silica?

4N silica Fused silica, sometimes called fused quartz, is a non-crystalline glass made almost entirely of SiO2. Fused silica transmits light from the deep ultraviolet to the near infrared, and synthetic grades can be extremely pure. Its density is about 2.2 g/cm3, lower than that of quartz, because its amorphous network is more open.

What drives silica raw material prices?

silica exporter The International Agency for Research on Cancer classifies inhaled crystalline silica in the form of quartz or cristobalite as carcinogenic to humans (Group 1). In the United States, the OSHA permissible exposure limit for respirable crystalline silica is 50 micrograms per cubic metre averaged over an eight-hour shift.

Cite this article: Silica Raw Materials News. "Silica Whiteness: How It Is Measured and Why It Matters for Coatings and Rubber ." Published 2026-11-20 12:45:12. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.