📌 Key Takeaways
- Topic: What Is E551? Silicon Dioxide as a Food Additive, Uses and Safety
- Keywords: low alpha silica
- Published: 2026-11-20 05:48:36
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].
What Is Mesoporous Silica? Structure, Pore Size and Applications in Drug Delivery and Catalysis
- Silica vs Silicone: Key Differences in Structure, Properties and Uses
- Is Silica in Toothpaste Safe? Abrasiveness, Enamel Effects and Safety
- What is Diatomaceous Earth?
- What Is Silicosis? Causes, Symptoms, Prevention and Silica Exposure
- In spite of the advantages of solvent-free processes, solvent-based techniques offer a more widespread choice for filling the pores of the carriers. Each method listed here consists of two steps. First, mixing the drug solution and carrier, then removing the solvent [ 36 ]. The loading cycles can be repeated as many times as desired to increase the charging efficiency [ 20, 36 ]. These techniques can be effectively applied to molecules both with great and poor aqueous solubility [ 37 ]. However, removing the solvent residue at the end of the process is essential, owing to the toxicity of usually used organic solvents [ 56 ], and it is normally better to select a less toxic organic solvent, if possible [ 37, 56 ]. The adsorption of the API is also influenced by the properties of the solvent, such as viscosity or surface tension. This group includes the adsorption approach, the incipient wetness approach, the solvent evaporation method, and the use of liquid and supercritical CO 2. The adsorption technique (solvent immersion method) is a low-energy process, but the pores can be filled effectively only if the API reaches a high concentration in the solvent [ 37 ]. The carrier system is immersed in the concentrated drug solution, while the liquid fills the pores owing to capillary forces. The mesopores are then separated from the solution by filtration or centrifugation. Finally, the pores are dried under reduced pressure [ 2, 36, 37 ]. Drug loading abilities can be seen for some APIs by this loading approach, in the following figure ( Figure 1 ). During the incipient wetness impregnation, a greatly concentrated drug solution is added dropwise onto the surface of the mesopores, in a nearly equal volume to the pore volume of the carrier [ 37 ]. In this case, the pores are filled with liquid also owing to the capillary forces. Then the pores are dried out at a higher temperature and under reduced pressure [ 2, 36, 37 ]. Nevertheless, the third approach, solvent evaporation, is the most widely used because it can be applied to a wide range of molecules, regardless of their solubility, making it fitting for higher therapeutic doses as well. It is not necessary to prepare a concentrated solution since the concentration gradually increases during the process (owing to the evaporation of the solvent). During the process, the drug should be dissolved in a volatile organic solvent, which is mixed with the carrier system [ 20 ]. All solvents are then eliminated by quick evaporation [ 37 ], while the drug is absorbed into the pores of the drug carrier [ 36, 37 ]. The use of supercritical CO 2 brings about more productive and deeper pore filling compared to other solvents. In this state, neither a liquid phase nor a gas phase exists. It combines the brilliant diffusion capacity of gases and the excellent solvation capacity of liquids. In addition, it is non-toxic, non-flammable, and can be readily eliminated from the system. A cost-effective choice can be liquid CO 2, which is a similarly effective solvent [ 36, 37 ].
- Silica Market Size 2026: Global Value, Growth Rate and Key Segments
Food Grade Silica: Specifications, E551 Status and Uses as an Anti-Caking Agent
What is silica (SiO₂)?
semiconductor grade silica 16. Izquierdo-Barba I., Martinez Á., Doadrio A.L., Pérez-Pariente J., Vallet-Regí M. Release evaluation of drugs from ordered three-dimensional silica structures. Eur. J. Pharm. Sci. 2005;26:365-373. doi: 10.1016/j.ejps.2005.06.009. [ DOI ] [ PubMed ] [ Google Scholar ]
What is the difference between fumed silica and precipitated silica?
silica 99% purity
What drives silica raw material prices?
precipitated silica supplier The word "diatomaceous" comes from the root word "diatom", which is a single-celled organism. Diatomaceous earth forms over a long period of time as millions of these organisms fossilize in lake beds. These lake beds then dry up, exposing the sedimentary deposit that we call diatomaceous earth.
Cite this article: Silica Raw Materials News. "What Is the Formula for Silicon Dioxide? SiO₂ Explained
." Published 2026-11-20 05:48:36.
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.