Glass Beads vs Silica Microspheres: Differences and Uses

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is E551? Silicon Dioxide as a Food Additive, Uses and Safety
  • Keywords: silica sand
  • Published: 2026-11-20 14:06:06
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

What Is Silica Sol? Composition, Acidic vs Alkaline Types and Industrial Applications

What Is Hollow Silica? Structure, Properties and Applications
To reduce or steer clear of the liquid used, it is possible to use other granulation techniques instead of the traditional wet granulation: either steam granulation or melt granulation, which decreases the risk of premature drug release compared to traditional wet granulation [ 98, 106, 108 ]. During steam granulation, steam is used rather than liquid water; it can be used with or without a binder. The steam shows a more uniform distribution than the atomization of the liquid; therefore, more regular granules are formed [ 98, 108 ]. The removal of water at the conclusion of granulation can be accomplished more quickly; a shorter process time is to be expected, so it is also an energy-efficient method.
Spherical Silica Market 2026: Semiconductor Packaging Demand and Growth Outlook
One of the biggest challenges of tableting greatly potent APIs (antibiotics, hormones, cytostatic molecules) is to attain content uniformity [ 95, 96 ]. Since these molecules are used in small doses, it is demanding to attain a homogeneous powder mixture during mixing and to make sure this homogeneity until the end of tableting. Also, it is a hurdle to develop a reproducible method that ensures content uniformity for each production batch, since the specified dose must be made sure between batches, not just within one batch [ 95, 96 ]. A reliable alternative method is to use mesoporous silica as a carrier system rather than simple powder mixing, thus preventing the segregation and aggregation of the low-dose API during mixing and compression. In this case, the preloaded mesoporous carrier and the necessary excipients are mixed, and then the powder mixture can be compressed directly or after granulation. The drug loading can be controlled by the concentration of the drug solution used to fill the carrier systems, which affects the amount of the drug content in the concluding medicine [ 95, 96 ]. Based on this, nearly unlimitedly low doses can be formulated into tablets, even in a concentration of 0.01%, just by properly preparing the solution [ 96 ]. The technique is well-controllable and dependable, since each tablet has the same drug content and the desired content uniformity. Furthermore, the method can be used in both batch-based and continuous production [ 96 ]. This may be a promising finding because there is evidence that it is challenging to move from batch-based to continuous manufacturing while maintaining the desired drug content and content uniformity [ 94 ]. But it should be noted that in this study, no nanocarrier system was used [ 94 ], so utilizing MSN formulations could make an enormous improvement in developing continuous tablet manufacturing [ 96 ]. A study shown that MSN carriers can also be used in orodispersible films to enhance the dissolution of poorly water-soluble drugs [ 100 ]. Based on in vitro drug release studies, more than 90% of prednisolone was released within 2 min when the loaded MSN was incorporated into the formulation. This means a much faster, immediate release in comparison with formulations containing the free form of the drug. In addition, precise dosing can be accomplished utilizing nanocarriers for personalized medication; furthermore, enabling the production of low-dose preparations without content uniformity problems [ 100 ].
What Is Silicosis? Causes, Symptoms, Prevention and Silica Exposure
Silica for Sealants: Grades, Functions and Formulation Guide
In the case of melt granulation, it is necessary to use meltable excipients that can melt at low temperatures (50-90 °C) as a binder [ 98, 108 ]. The molten binder forms the agglomerates during cooling and solidification. Since it does not need a liquid binder, it is advantageous for use in the case of moisture-sensitive molecules. However, its use should be avoided for heat-sensitive materials.

Silica Market Size 2026: Global Value, Growth Rate and Key Segments

What is silica (SiO₂)?

how to disperse fumed silica 9. Mitran R.A., Deaconu M., Matei C., Berger D. Nanocarriers for Drug Delivery: Nanoscience and Nanotechnology in Drug Delivery. Elsevier Science Ltd.; Amsterdam, The Netherlands: 2018. Mesoporous Silica as Carrier for Drug-Delivery Systems; pp. 351-374. [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

barium sulfate

What drives silica raw material prices?

silica mesh size 59. Ritger P.L., Peppas N.A. An effortless equation for description of solute release I. Fickian and non-fickian release from non-swellable devices in the form of slabs, spheres, cylinders or discs. J. Control. Release. 1987;5:23-36. doi: 10.1016/0168-3659(87)90034-4. [ DOI ] [ PubMed ] [ Google Scholar ]

Cite this article: Silica Raw Materials News. "Silica for Optical Fiber: Purity Requirements and Manufacturing Role ." Published 2026-11-20 14:06:06. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.