Rubber Grade Silica: Specifications, BET Ranges and How to Choose for Rubber Compounds

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silica Gel Column Chromatography: How It Works and How to Choose the Silica
  • Keywords: bulk silica powder
  • Published: 2026-11-20 01:31:45
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
87. Ji J.H., Yu I.J. Estimation of human equivalent exposure from rat inhalation toxicity study of silver nanoparticles employing multi-path particle dosimetry model. Toxicol. Res. 2012;1:206-210. doi: 10.1039/c2tx20029e. [ DOI ] [ Google Scholar ]

What Is an Antiblock Agent for Film? How Silica Prevents Film Blocking

Silica as a Rheology Modifier: How It Controls Viscosity and Flow
Alkaline Silica Sol: Properties, pH Range and Industrial Uses
Wet granulation is the most frequently used technique to process MSNs, because of the many possibilities inherent in it [ 106 ]. Conventional wet granulation is well-suited for the granulation of silica nanocarriers, but several things should be considered during implementation. There are two possible sequences: first, the drug loading, followed by the granulation of the loaded carriers [ 104 ], or the opposite way, the granulation of the empty carriers, then loading the drug into the prepared granules. In the first case, during the planning and implementation of the process, special attention must be paid to the critical process parameters to steer clear of premature drug release [ 104 ]. In general, it can be noted that as little moisture as possible should be used during granulation, consequently decreasing the risk of premature drug release. Still, simultaneously, moisture adequate to produce the desired agglomeration must be made sure [ 104 ]. The risk of premature drug release depends to a certain extent on the chemical structure of the API and the carrier. Szewczyk and Prokopowicz developed doxycycline-loaded MSN pellets with prolonged release kinetics [ 40 ]. First, the drug was loaded into the pores, and then pellets were produced from the loaded mesoporous material with other excipients by wet extrusion and spheronization. For comparison, traditional doxycycline pellets were also prepared. This study demonstrated the importance of utilizing mesoporous carriers for the delayed or sustained release of water-soluble drugs. Pelletization was a successful method to reduce the initial burst release of doxycycline; twice the release time was observed compared to traditional pellets [ 40 ]. Szewczyk et al. developed another DDS loaded with an antibiotic compound (cefazolin) for the treatment of osteomyelitis [ 66 ]. The amine-functionalized MSN was successfully loaded with the drug, and because of the powerful interactions between the negatively charged cefazolin and the positively charged surface of the carrier, a prolonged release of 5 days was observed, which made sure a longer antibacterial influence than with classic pellets. This was proven by the microbiological activity assays of the pellets against S. aureus culture [ 66 ]. These results are promising in antibiotic or anticancer therapy, where therapeutic concentration is needed for a longer period [ 40, 66 ]. A comparable outcome was presented in another publication about metformin-containing MSN pellets with prolonged release kinetics [ 85 ]. After drug loading, pellets were formed with the mixture of the preloaded carriers and chitosan solution, and then the pellets were coated with five layers of chitosan. Since the stomach is not considered the best possible absorption surface for metformin, it is advisable to delay the release until conditions in the intestines are ideal for maximum bioavailability. Chitosan plays an important role in this formulation; it slows down and delays the metformin release and offers delayed and prolonged release kinetics, thereby preventing speedy blood level peaks after application [ 85 ]. On the contrary, Wang et al. published a post on MSN pellets filled with poorly water-soluble carbamazepine, and they observed better oral bioavailability compared to commercially available tablets based on in vivo analysis performed on dogs [ 86 ]. In vitro dissolution studies confirmed a raised dissolution rate compared to crystalline carbamazepine due to the amorphous state of the drug within the pores. This immediate-release pellet formulation allows for a reduction in the drug dose, sustaining the same clinical influence [ 86 ].
Silica for Printing Ink: Functions, Grades and Formulation Tips
Because this is a fine powder, it could potentially irritate anyone with sensitive lungs, among them asthmatics. If this is a cause of concern for you, we advise using a dust mask while applying DE.
Feed Grade Silica: Specifications and Uses as a Carrier and Flow Agent in Animal Feed

Silica as an Abrasive: Hardness, Particle Size and Applications

What is silica (SiO₂)?

high purity quartz supplier 62. Wang H., Chen L., Li R., Lv C., Xu Y., Xiong Y. Polydopamine-coated mesoporous silica nanoparticles co-loaded with Ziyuglycoside I and Oseltamivir for synergistic treatment of viral pneumonia. Int. J. Pharm. 2023;645:123412. doi: 10.1016/j.ijpharm.2023.123412. [ DOI ] [ PubMed ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

Covia silica

What drives silica raw material prices?

fumed silica CAS 112945-52-5 MSNs are SiO 2 nanoparticles [ 2 ] with a pore diameter between 2 and 50 nm [ 3, 4 ] and with a total diameter of a maximum of 1 µm. Their use in drug delivery dates to the early 1990s when they were synthesized for various scientific applications [ 5 ]. The material known as mesoporous silica was discovered by Mobil Oil Corporation in 1992 [ 6 ]. Their first drug delivery application was demonstrated in 2001 when MCM-41 silica was used to release ibuprofen [ 7 ]. Since then, MSNs have become an increasingly popular drug delivery system due to their advantageous properties and have been typically recognized as secure (GRAS) by the FDA. Tiny SNPs have been approved for human clinical imaging studies, setting the stage for their use in clinical applications of drug delivery. The number of related research activities is continuously increasing each year, expanding their role in cancer treatment, gene delivery, and oral illness therapy [ 5 ]. Their pore size is located between microporous and macroporous systems. They can be used in diverse shapes (sphere, cube, ellipsoid, rod) and sizes, with different pore sizes and pore structures [ 2, 3, 4, 8, 9, 10 ]. They have a high degree of stability [ 8 ] and a rigid framework, which results in resistance to temperature, pH, enzymatic degradation, and mechanical force [ 4 ]. Thanks to the large number of pores, they have a massive particular surface region (approx. 700-1300 m 2 /g) and pore volume (approx. 0.5-1.5 cm 3 /g), which enables effective adsorption of diverse molecules [ 2, 3, 4, 8, 9, 10 ]. By changing the pore size distribution, the range of adsorbable molecules can be controlled [ 3 ], which also lets separation based on size exclusion, which means selective adsorption of molecules of certain sizes. Depending on the size of the pores, tiny molecules together with high molecular weight proteins can be transported into the pores [ 8 ]. In addition, chemical separation is also possible if the surface of the pores is coated with specific functional groups [ 4 ], which enables the separation of the APIs according to their structure [ 4 ]. Such modifications may include the setting of hydrophilicity/hydrophobicity of the surface, depending on whether the adsorption of hydrophobic or hydrophilic molecules is targeted [ 4 ]. By inserting different functional groups, the surface charge can also be controlled so that certain molecules will bind more efficiently. MSNs have a negative surface charge in biological environments, which promotes the electrostatic adsorption of positively charged APIs in the pores [ 10 ]. Moreover, the biological markers attached to the surface of the nanoparticles enable the drug-carrying system to deliver the API in a tissue-specific manner [ 2, 4, 8, 9, 10 ]. A substantial problem is the premature release of the API from the pores during transport [ 4, 8 ], which can be solved by utilizing gatekeepers that respond to special stimuli and keep the pores closed until the stimulus [ 2, 4, 8 ]. In this way, controlled drug delivery and stimuli-responsive release can be achieved [ 2, 4, 9 ]. The drug release could be triggered by temperature, pH, redox potential, light, enzymes, magnetic field, or different ligands [ 4, 8, 11 ].

Cite this article: Silica Raw Materials News. "What Is Silica Aerogel? Structure, Thermal Performance and Insulation Applications ." Published 2026-11-20 01:31:45. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.