Silica as a Food Additive: Uses, E551 Approval and Safety

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: What Is the Refractive Index of Silica? Values for Fused Silica, Quartz and Amorphous Silica
  • Keywords: copper clad laminate filler
  • Published: 2026-11-20 12:53:07
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
7. Oral Dosage Forms

What Is the Mohs Hardness of Silica and Quartz? Hardness Values Explained

Silica Supplier Germany: Leading Producers and Sourcing Considerations
Mesoporous silica nanoparticles have poor powder rheology and poor flow properties, due to their low bulk density, small particle size, and high hygroscopicity, which make further processing and formulation, especially with direct compression, difficult [ 104 ]. This issue can be eliminated by granulating the carriers. Flowability and compactibility can also be boosted by granulation [ 86, 104 ]. During granulation, the desired degree of dispersity is attained by agglomeration of the particles, thereby creating a best possible flow characteristic. However, it is true that during granulation, the specific surface area and the pore volume of the carrier may decrease, also decreasing its adsorption capacity, which is a disadvantage from the facet of the API absorption [ 104, 105 ]. However, since this reduction is mostly negligible compared to the total specific surface area, a substantial improvement in its flow properties can considerably improve the overall performance [ 104, 105 ]. The critical parameters for the process are the following: the quantity of granulating liquid, the liquid addition rate, the mixing speed, the process time, and the temperature. Of course, the applied binder also plays an essential part in the process [ 105 ]. These parameters affect the granule size, specific surface area, bulk density, flow properties (Hausner-factor, Carr-index), crushing strength, compressibility, and compactibility [ 105 ].
Fumed Silica 200 m²/g: Properties, Typical Uses and Comparable Grades
Silica for UV Adhesive: Rheology Control and Transparency Considerations
Copper Clad Laminate Filler: Silica Types, Dielectric Properties and Selection

Silica TDS: What a Technical Data Sheet Includes and How to Compare Grades

What is silica (SiO₂)?

fused silica CAS 60676-86-0

What is the difference between fumed silica and precipitated silica?

TEOS

What drives silica raw material prices?

silica aerogel blanket Silica nanoparticles can be created and used in diverse shapes (sphere, cube, ellipsoid, rod). The shape of the particles can be characterized by the facet ratio, which is 1 for spherical particles, but can reach 4 in the case of elongated rod-shaped ones [ 1 ]. Particles with different aspect ratios may exhibit different biodistribution and elimination [ 10, 19, 25 ]. The residence time in the gastrointestinal system is influenced by the particle shape [ 1, 19 ]. Spherical nanoparticles have a shorter residence time than rod-shaped ones [ 19 ] and tend to accumulate in the liver. Simultaneously, in the case of rods, a more significant accumulation is observed in the spleen [ 10 ]. In addition, particles with a higher element ratio exert longer half-life in the bloodstream and show slower elimination [ 1, 19 ], possibly due to faster renal excretion of spherical than rod-shaped particles [ 19, 25 ]. By increasing the facet ratio, a longer degradation time can also be observed [ 25 ].

Cite this article: Silica Raw Materials News. "Submicron Spherical Silica: Specifications and Uses in Underfill and Advanced Packaging ." Published 2026-11-20 12:53:07. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.