📌 Key Takeaways
- Topic: Fumed Silica Manufacturer: Production Process, Key Grades and How to Choose
- Keywords: silica supplier Vietnam
- Published: 2026-11-20 06:35:06
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Silica as an Abrasive: Hardness, Particle Size and Applications
- Fused Silica vs Quartz: Differences in Structure, Purity and Applications
- Alumina Powder vs Silica Powder: Properties, Uses and How to Choose
- To reduce or steer clear of the liquid used, it is possible to use other granulation techniques instead of the traditional wet granulation: either steam granulation or melt granulation, which decreases the risk of premature drug release compared to traditional wet granulation [ 98, 106, 108 ]. During steam granulation, steam is used rather than liquid water; it can be used with or without a binder. The steam shows a more uniform distribution than the atomization of the liquid; therefore, more regular granules are formed [ 98, 108 ]. The removal of water at the conclusion of granulation can be accomplished more quickly; a shorter process time is to be expected, so it is also an energy-efficient method.
- What Is the Mohs Hardness of Silica and Quartz? Hardness Values Explained
- The skin is our largest organ, which consists of three layers: the epidermis, dermis, and hypodermis. Owing to its big surface zone, it also serves as an essential gateway for drug administration [ 25 ], which is fitting for both local (dermal) or systemic (transdermal) therapy [ 25, 56 ]. In spite of the popularity of this administration route, it is a challenge to get the API into deeper layers of the skin. The outermost layer of the epidermis, the stratum corneum, is the biggest hurdle to molecular penetration [ 25, 56 ]. However, the molecules must be absorbed through the capillaries of the dermis to achieve a systemic impact, which can be facilitated employing nanocarriers [ 56 ]. In addition, sweat glands or hair follicles can be effective alternative routes for the molecules to enter the deeper layers of the skin [ 25, 56 ]. In summary, it can be called as the transappendageal route. Among physicochemical properties, particle size is one of the most vital factors influencing absorption. Particles in the range between 200 and 300 nm are suitable for local treatment of the skin in diseases such as atopic dermatitis [ 25 ] since particles larger than 75 nm do not pass through the stratum corneum [ 25 ]. Smaller particles (approximately 50 nm) are suitable for systemic treatment [ 25 ], and on the whole, it can be said that nanoparticles with a diameter smaller than 25 nm can penetrate the skin most effectively, so they can be used for transdermal drug administration with an appropriate formulation [ 56 ]. By controlling the size of the nanocarrier, they penetrate to different depths in the skin. From the element of surface characteristics, cationic amino-functionalized MSNs show more efficient penetration into deeper layers of the skin than the particles with anionic surfaces of the same size [ 25 ]. The use of MSNs as a drug carrier may improve aqueous solubility, stability, and skin penetration of the drug [ 61 ]. In a research, gels containing MSN were prepared by employing distilled water to form the base, adding the gelling agent (Poloxamer 407), and adding HPMC to enhance the viscosity [ 83 ]. In another publication, MSN containing oleogels were prepared with sunflower oil and the addition of colloidal silicon dioxide as a gelling agent [ 61 ]. According to in vitro experiments, the gel matrix also affected the drug release kinetics [ 61, 83 ]. Slower drug release was observed in the case of gels containing loaded MSNs, compared to the free carriers, and the outcomes demonstrated close to zero-order release kinetics [ 61 ]. According to in vitro biocompatibility studies, this gel complex did not show any evidence of cytotoxicity on dermal fibroblast cells. Moreover, according to in vivo dermal safety studies, it has been proven that this preparation does not cause skin irritation during application, and so this formulation can be considered a safe product [ 61 ].
- Is Silicon Dioxide Safe? What Science and Regulators Say
- In the case of solvent-free processes, the main advantage is that it is not necessary to get rid of the solvent residue from the system at the conclusion of the process, and the concentration of the API can also be controlled [ 36, 37 ]. Techniques employed in this class comprise physical mixing, co-milling, and melt sorption methods. The simplest approach is physical mixing [ 37 ], where fast drug filling is possible without special equipment. During direct mixing of the mesoporous carrier and the drug, the silanol groups on the surface of the silica bind the drug molecules. Nonetheless, its application is limited because it can be used largely for water-soluble molecules [ 37, 56 ]. Another method is co-milling, during which the mixture of the API and the nanocarrier is milled together [ 36, 37, 56 ]. In the case of the melt sorption method, the mixture of the API and the carrier system is heated above the melting point of the API under continuous stirring, while the melt is absorbed into the pores [ 36, 37 ]. After that, the system is cooled under lowered pressure, so that the molecules will be in an amorphous state in the pores [ 36, 37 ]. Nevertheless, this technique cannot be used in the case of heat-sensitive materials, due to the considerable thermal decomposition [ 20 ]. Microwave radiation can also be used for melting [ 2, 36 ].
Solvay Zeosil: Highly Dispersible Silica Grades for Tires and Rubber
What is silica (SiO₂)?
water glass Although the advent of active and passive targeting, particularly stimulus-responsive gates, represents a perfect marriage of the latest advancement and actual usage, e.g., folic acid and pH-responsive systems, a reference to likely challenges involved would be appropriate.
What is the difference between fumed silica and precipitated silica?
matting agent supplier Project No. TKP2021-EGA-32 was implemented with support provided by the Ministry of Culture and Innovation of Hungary through the National Research, Development, and Innovation Fund, financed under the TKP2021-EGA funding scheme.
What drives silica raw material prices?
silica surface area Physical and polymorphic stability also depend on the way of loading. Prednisolone underwent a polymorphic transformation from form I to form II within pores when it was loaded into MSNs with the solvent-evaporation approach, whereas melt-loading retained the original polymorph. This means that contacts between the solvent, API, and silica, and the presence of residual solvent can template some polymorphic structures. Furthermore, confinement within thin channels stabilizes metastable polymorphs that would otherwise really swiftly convert into the thermodynamically stable polymorph in the bulk. This offers an opportunity to selectively stabilize desired polymorphs by pore size [ 48 ]. Dwyer et al. showed that confinement in nanopores is capable of stabilizing metastable polymorphs or even forming new polymorphs not accessible in the bulk. For instance, fenofibrate crystallized in favored metastable states during confinement in mesoporous matrices, while other APIs formed nanoscale crystals of different thermodynamic properties. The above findings show that MSNs are not only stabilizers but also nanocrystallization chambers that can govern polymorphic selection and routes [ 49 ].
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.