📌 Key Takeaways
- Topic: Fumed Silica Market 2026: Size, Growth, Key Players and Forecast
- Keywords: silica manufacturer China
- Published: 2026-11-20 13:41:38
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
How to Disperse Fumed Silica: Methods, Equipment and Common Mistakes
- What Is a Silane Coupling Agent? How It Works and How to Choose One for Silica
- Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].
- Silica Mesh Size Chart: Mesh to Micron Conversion and How to Choose
- Silica as an Excipient: Functions, Grades and Pharmaceutical Applications
- 25. Janjua T.I., Cao Y., Kleitz F., Linden M., Yu C., Popat A. Silica nanoparticles: A review of their safety and current strategies to overcome biological barriers. Adv. Drug Deliv. Rev. 2023;203:115115. doi: 10.1016/j.addr.2023.115115. [ DOI ] [ PubMed ] [ Google Scholar ]
- Silica SDS: Key Hazards, Handling and Storage Information Explained
What Is the Molar Mass of Silicon Dioxide (SiO₂)? Calculation Explained
What is silica (SiO₂)?
Novoray
What is the difference between fumed silica and precipitated silica?
What drives silica raw material prices?
hydrophilic fumed silica The carriers can have ordered and disordered pore structures [ 1, 2 ]. The ordered mesopores have a regular, homogeneous pore structure and a tunable internal frame, which permits the optimization of the API formulation, while the disordered ones have a random distribution of pore structure. Pores can be divided into two chief groups according to their geometry. There are open and closed pores, based on whether the pore is accessible to the medium or not. In the case of open pores, further differentiation is also possible. Blind pores are only accessible from one direction, while through pores are accessible from at least two directions [ 3 ]. The arrangement of the pores can also be defined and changed, hence the kinetics and dynamics of the release of the API can be influenced and regulated [ 1 ]. Laminar (tubular), radial, hexagonal, or cubic arrangements can also be created [ 1 ]. It is well known that the pore size significantly affects drug loading and drug release [ 1, 3 ]. Nonetheless, the literature is not crystal clear regarding correlation [ 14 ]. Some studies show proof that larger pores provide faster drug release [ 15, 16, 26 ], and larger pores have demonstrated a faster degradation rate in the lymph nodes [ 15 ], and reports limited release for smaller pores as they limit the diffusion process, which is called the steric hindrance influence [ 16, 26 ]. Nevertheless, in other publications, proof recommends that larger pores facilitate slower drug release, as the drug is loaded and trapped in deeper channels, requiring a longer access time for the release medium [ 14 ]. In general, the adsorption capacity can indeed be increased by increasing the specific surface area of the carrier and by decreasing the pore diameter [ 17 ].
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.