What Is Silane Treated Silica? How Silane Modification Improves Dispersion and Performance

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: Silicon Dioxide Structure: Tetrahedral Network and Crystal Forms Explained
  • Keywords: Sibelco quartz
  • Published: 2026-11-20 05:31:46
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals

Does Silicon Dioxide Conduct Electricity? Why SiO₂ Is an Insulator

Silica for Wafer Polishing: Slurry Types, Particle Size and Performance
Nano Silica Supplier: How to Verify Particle Size, Purity and Consistency
5. Fatima R., Katiyar P., Kushwaha K. Recent advances in mesoporous silica nanoparticle: Synthesis, drug loading, release mechanisms, and various applications. Front. Nanotechnol. 2025;7:1564188. doi: 10.3389/fnano.2025.1564188. [ DOI ] [ Google Scholar ]
Alumina Powder vs Silica Powder: Properties, Uses and How to Choose
Wet granulation is the most frequently used technique to process MSNs, because of the many possibilities inherent in it [ 106 ]. Conventional wet granulation is well-suited for the granulation of silica nanocarriers, but several things should be considered during implementation. There are two possible sequences: first, the drug loading, followed by the granulation of the loaded carriers [ 104 ], or the opposite way, the granulation of the empty carriers, then loading the drug into the prepared granules. In the first case, during the planning and implementation of the process, special attention must be paid to the critical process parameters to steer clear of premature drug release [ 104 ]. In general, it can be noted that as little moisture as possible should be used during granulation, consequently decreasing the risk of premature drug release. Still, simultaneously, moisture adequate to produce the desired agglomeration must be made sure [ 104 ]. The risk of premature drug release depends to a certain extent on the chemical structure of the API and the carrier. Szewczyk and Prokopowicz developed doxycycline-loaded MSN pellets with prolonged release kinetics [ 40 ]. First, the drug was loaded into the pores, and then pellets were produced from the loaded mesoporous material with other excipients by wet extrusion and spheronization. For comparison, traditional doxycycline pellets were also prepared. This study demonstrated the importance of utilizing mesoporous carriers for the delayed or sustained release of water-soluble drugs. Pelletization was a successful method to reduce the initial burst release of doxycycline; twice the release time was observed compared to traditional pellets [ 40 ]. Szewczyk et al. developed another DDS loaded with an antibiotic compound (cefazolin) for the treatment of osteomyelitis [ 66 ]. The amine-functionalized MSN was successfully loaded with the drug, and because of the powerful interactions between the negatively charged cefazolin and the positively charged surface of the carrier, a prolonged release of 5 days was observed, which made sure a longer antibacterial influence than with classic pellets. This was proven by the microbiological activity assays of the pellets against S. aureus culture [ 66 ]. These results are promising in antibiotic or anticancer therapy, where therapeutic concentration is needed for a longer period [ 40, 66 ]. A comparable outcome was presented in another publication about metformin-containing MSN pellets with prolonged release kinetics [ 85 ]. After drug loading, pellets were formed with the mixture of the preloaded carriers and chitosan solution, and then the pellets were coated with five layers of chitosan. Since the stomach is not considered the best possible absorption surface for metformin, it is advisable to delay the release until conditions in the intestines are ideal for maximum bioavailability. Chitosan plays an important role in this formulation; it slows down and delays the metformin release and offers delayed and prolonged release kinetics, thereby preventing speedy blood level peaks after application [ 85 ]. On the contrary, Wang et al. published a post on MSN pellets filled with poorly water-soluble carbamazepine, and they observed better oral bioavailability compared to commercially available tablets based on in vivo analysis performed on dogs [ 86 ]. In vitro dissolution studies confirmed a raised dissolution rate compared to crystalline carbamazepine due to the amorphous state of the drug within the pores. This immediate-release pellet formulation allows for a reduction in the drug dose, sustaining the same clinical influence [ 86 ].
Silica as a Toothpaste Abrasive: How It Cleans and How RDA Is Controlled

Top Fumed Silica Manufacturers: Global Leaders and Emerging Suppliers (2026)

What is silica (SiO₂)?

silica COA 71. Devangan P., Saini A., Patel D., Kolhe U. Solubility Enhancement of Aripiprazole via Mesoporous Silica: Preparation, Characterization, In vitro Drug Release, and Solubility Determination. J. Pharm. Innov. 2023;18:1316-1327. doi: 10.1007/s12247-023-09722-9. [ DOI ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

custom silica Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].

What drives silica raw material prices?

silica for toothpaste abrasive Nevertheless, mesoporous carriers are frequently associated with poor tabletability because of bad powder flow behavior; thus, direct tableting can only be attained by adding diverse excipients in large quantities [ 95 ]. Such useful excipients include microcrystalline cellulose (filler), lactose monohydrate (filler), PVP (binder), sodium carboxymethylcellulose (disintegrant), croscarmellose sodium (super disintegrant), colloidal silica (anti-adhesion material), magnesium stearate (lubricant), and talc (lubricant) [ 39, 95, 96, 97 ]. However, the drug content in the dosage unit decreases with high amounts of excipients added, so larger tablets must be designed to attain the proper dose [ 95 ]. Another issue is that the greater compression force used during tableting may deform and damage the pore structure of the carrier, which might decrease the expected drug release rate [ 36, 97, 98 ]. When higher compression forces are applied, the pore diameter decreases, which affects both total pore volume and particular surface region, reducing the drug release rate from the carrier [ 97, 98 ]. The use of microcrystalline cellulose may be a solution to this problem, as it deforms plastically under pressure while distributing the energy accumulated in the tablet during compression. Furthermore, croscarmellose sodium may improve the drug release rate [ 97, 98 ]. Granulation of mesoporous material is a proper choice to solve issues related to poor powder rheology.

Cite this article: Silica Raw Materials News. "Silica Supplier Thailand: Market Overview and Sourcing Options ." Published 2026-11-20 05:31:46. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.