📌 Key Takeaways
- Topic: BET Surface Area of Silica: Measurement Method and Typical Values by Grade
- Keywords: silica boiling point
- Published: 2026-11-20 02:27:01
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Silica Specification Sheet: Key Parameters to Check Before Buying
- What Is Diatomaceous Earth? Composition, Grades and Common Uses
- Project No. TKP2021-EGA-32 was implemented with support provided by the Ministry of Culture and Innovation of Hungary through the National Research, Development, and Innovation Fund, financed under the TKP2021-EGA funding scheme.
- Acidic Silica Sol: Properties, Stability and Applications
- Fumed Silica Brands Compared: Aerosil, Cab-O-Sil, HDK and Chinese Alternatives
- Is There a Quartz Sand Shortage? Causes, Impact and Supply Outlook
Quartz CAS 14808-60-7: Identification, Hazards and Regulatory Information
What is silica (SiO₂)?
quartz sand shortage
What is the difference between fumed silica and precipitated silica?
monodisperse silica spheres 47. Aulifa D.L., Saepudin A.H., Margaretha P., Khairinisa M.A., Budiman A. Characterization of Alpha Mangostin Loaded-Mesoporous Silica Nanoparticle and the Impact on Dissolution and Physical Stability. Nanotechnol. Sci. Appl. 2025;18:1-13. doi: 10.2147/NSA.S499007. [ DOI ] [ PMC free piece ] [ PubMed ] [ Google Scholar ]
What drives silica raw material prices?
high purity silica In the case of solvent-free processes, the main advantage is that it is not necessary to get rid of the solvent residue from the system at the conclusion of the process, and the concentration of the API can also be controlled [ 36, 37 ]. Techniques employed in this class comprise physical mixing, co-milling, and melt sorption methods. The simplest approach is physical mixing [ 37 ], where fast drug filling is possible without special equipment. During direct mixing of the mesoporous carrier and the drug, the silanol groups on the surface of the silica bind the drug molecules. Nonetheless, its application is limited because it can be used largely for water-soluble molecules [ 37, 56 ]. Another method is co-milling, during which the mixture of the API and the nanocarrier is milled together [ 36, 37, 56 ]. In the case of the melt sorption method, the mixture of the API and the carrier system is heated above the melting point of the API under continuous stirring, while the melt is absorbed into the pores [ 36, 37 ]. After that, the system is cooled under lowered pressure, so that the molecules will be in an amorphous state in the pores [ 36, 37 ]. Nevertheless, this technique cannot be used in the case of heat-sensitive materials, due to the considerable thermal decomposition [ 20 ]. Microwave radiation can also be used for melting [ 2, 36 ].
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.