📌 Key Takeaways
- Topic: How to Get a Free Silica Sample: What to Request and How to Test It
- Keywords: crystalline silica dust hazard
- Published: 2026-11-20 00:21:08
- Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
Fumed Silica Price: 2026 Price Ranges, Grade Differences and Cost Drivers
- Silica Sol Manufacturer: Product Types, Quality Control and How to Choose
- Wet granulation is the most frequently used technique to process MSNs, because of the many possibilities inherent in it [ 106 ]. Conventional wet granulation is well-suited for the granulation of silica nanocarriers, but several things should be considered during implementation. There are two possible sequences: first, the drug loading, followed by the granulation of the loaded carriers [ 104 ], or the opposite way, the granulation of the empty carriers, then loading the drug into the prepared granules. In the first case, during the planning and implementation of the process, special attention must be paid to the critical process parameters to steer clear of premature drug release [ 104 ]. In general, it can be noted that as little moisture as possible should be used during granulation, consequently decreasing the risk of premature drug release. Still, simultaneously, moisture adequate to produce the desired agglomeration must be made sure [ 104 ]. The risk of premature drug release depends to a certain extent on the chemical structure of the API and the carrier. Szewczyk and Prokopowicz developed doxycycline-loaded MSN pellets with prolonged release kinetics [ 40 ]. First, the drug was loaded into the pores, and then pellets were produced from the loaded mesoporous material with other excipients by wet extrusion and spheronization. For comparison, traditional doxycycline pellets were also prepared. This study demonstrated the importance of utilizing mesoporous carriers for the delayed or sustained release of water-soluble drugs. Pelletization was a successful method to reduce the initial burst release of doxycycline; twice the release time was observed compared to traditional pellets [ 40 ]. Szewczyk et al. developed another DDS loaded with an antibiotic compound (cefazolin) for the treatment of osteomyelitis [ 66 ]. The amine-functionalized MSN was successfully loaded with the drug, and because of the powerful interactions between the negatively charged cefazolin and the positively charged surface of the carrier, a prolonged release of 5 days was observed, which made sure a longer antibacterial influence than with classic pellets. This was proven by the microbiological activity assays of the pellets against S. aureus culture [ 66 ]. These results are promising in antibiotic or anticancer therapy, where therapeutic concentration is needed for a longer period [ 40, 66 ]. A comparable outcome was presented in another publication about metformin-containing MSN pellets with prolonged release kinetics [ 85 ]. After drug loading, pellets were formed with the mixture of the preloaded carriers and chitosan solution, and then the pellets were coated with five layers of chitosan. Since the stomach is not considered the best possible absorption surface for metformin, it is advisable to delay the release until conditions in the intestines are ideal for maximum bioavailability. Chitosan plays an important role in this formulation; it slows down and delays the metformin release and offers delayed and prolonged release kinetics, thereby preventing speedy blood level peaks after application [ 85 ]. On the contrary, Wang et al. published a post on MSN pellets filled with poorly water-soluble carbamazepine, and they observed better oral bioavailability compared to commercially available tablets based on in vivo analysis performed on dogs [ 86 ]. In vitro dissolution studies confirmed a raised dissolution rate compared to crystalline carbamazepine due to the amorphous state of the drug within the pores. This immediate-release pellet formulation allows for a reduction in the drug dose, sustaining the same clinical influence [ 86 ].
- Silica for Silicone Rubber: Fumed vs Precipitated Silica and Grade Selection
- Colloidal Silica Supplier: How to Choose by Particle Size, Stability and pH
- 59. Ritger P.L., Peppas N.A. An effortless equation for description of solute release I. Fickian and non-fickian release from non-swellable devices in the form of slabs, spheres, cylinders or discs. J. Control. Release. 1987;5:23-36. doi: 10.1016/0168-3659(87)90034-4. [ DOI ] [ PubMed ] [ Google Scholar ]
- Quartz CAS 14808-60-7: Identification, Hazards and Regulatory Information
- 71. Devangan P., Saini A., Patel D., Kolhe U. Solubility Enhancement of Aripiprazole via Mesoporous Silica: Preparation, Characterization, In vitro Drug Release, and Solubility Determination. J. Pharm. Innov. 2023;18:1316-1327. doi: 10.1007/s12247-023-09722-9. [ DOI ] [ Google Scholar ]
Silica Free Flow Agent: Typical Dosage, Benefits and Best Grades
What is silica (SiO₂)?
325 mesh silica
What is the difference between fumed silica and precipitated silica?
E551 45. Knapik-Kowalczuk J., Kramarczyk D., Chmiel K., Romanova J., Kawakami K., Paluch M. Importance of mesoporous silica particle size in the stabilization of amorphous pharmaceuticals - The case of simvastatin. Pharmaceutics. 2020;12:384. doi: 10.3390/pharmaceutics12040384. [ DOI ] [ PMC free article ] [ PubMed ] [ Google Scholar ]
What drives silica raw material prices?
silica carrier On The Bright Side
Cite this article: Silica Raw Materials News. "Silica as a Thickening Agent: How It Works in Liquids, Resins and Gels
." Published 2026-11-20 00:21:08.
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.
/news/article.htmlDisclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.