How to Disperse Fumed Silica: Methods, Equipment and Common Mistakes

Published: Source: Silica Raw Materials News Section: Silica Raw Materials

📌 Key Takeaways

  • Topic: How to Buy Silica Powder: Grade Selection, Supplier Checks and Ordering Tips
  • Keywords: silica in makeup powder
  • Published: 2026-11-20 11:46:50
  • Field: Silica (SiO₂) raw materials · Inorganic non-metallic materials · Chemicals
11. Ortiz A.C., Jackson N., Buelvas N., Jerez A., López-Muñoz R.A., Morales J., Arriagada F. Release kinetics approach of stimuli-responsive mesoporous silica nanocarriers: pH-sensitive linker versus pH-sensitive framework. J. Drug Deliv. Sci. Technol. 2024;91:105212. doi: 10.1016/j.jddst.2023.105212. [ DOI ] [ Google Scholar ]

Silica for 3D Printing: Uses in Resins, Powders and Binder Jetting

What Is Silica Sol? Composition, Acidic vs Alkaline Types and Industrial Applications
What Is Silica Slurry? Composition, Types and Uses in Polishing
Certain molecules have an excessive adhesive property, and this represents another problem to be eliminated during direct tableting. In this case, a tiny amount of powder adheres to the surface of the upper- and lower punch or the die during each compression cycle [ 94 ]. Therefore, tablet weight changes, and tablets with an uneven surface are obtained. More importantly, this may bring about poor content uniformity due to API loss. By contrast, if the greatly adhesive API is enclosed in the pores of the silica carrier, direct contact with the metal parts is eliminated. Thus, the loss of the API can be avoided [ 92, 94 ].
How to Buy Fumed Silica: Grade Selection, Sampling and Supplier Evaluation
This equation fits especially well for premature release, up to 60% of the drug released, when there is no change in the matrix system during the release process. From a perspective of pore geometry, it basically controls drug release rates by affecting effective diffusion pathways. Boosted complexity of geometries raises tortuosity and reduces effective diffusion. High tortuosity and low pore connectivity cut down drug diffusion, consequently lowering the release rates. Furthermore, surface roughness and pore size distribution affect surface region, diffusion, and residence times, and thereby drug release kinetics. Thus, coupling the Fick diffusion model with parameters characterizing pore geometry (e.g., porosity, tortuosity, etc.) enables for more precise and automatic modeling of drug release kinetics. In this way, it is nicely clarified why release profiles differ for chemically comparable matrices due to differences in their geometrical shapes [ 59, 60 ].
Silica HS Code: Correct Customs Classification for Silica, Quartz and Silica Gel
Tamás Sovány

Fumed Silica Market 2026: Size, Growth, Key Players and Forecast

What is silica (SiO₂)?

silica slurry 96. Sun W.J., Aburub A., Sun C.C. Particle Engineering for Enabling a Formulation Platform Suitable for Manufacturing Low-Dose Tablets by Direct Compression. J. Pharm. Sci. 2017;106:1772-1777. doi: 10.1016/j.xphs.2017.03.005. [ DOI ] [ PubMed ] [ Google Scholar ]

What is the difference between fumed silica and precipitated silica?

silica for electronic encapsulation 69. Qi G., Shi G., Wang S., Hu H., Zhang Z., Yin Q., Li Z., Hao L. A Novel pH-Responsive Iron Oxide Core-Shell Magnetic Mesoporous Silica Nanoparticle (M-MSN) System Encapsulating Doxorubicin (DOX) and Glucose Oxidase (Gox) for Pancreatic Cancer Treatment. Int. J. Nanomed. 2023;18:7133-7147. doi: 10.2147/IJN.S436253. [ DOI ] [ PMC free article ] [ PubMed ] [ Google Scholar ]

What drives silica raw material prices?

silica for sunscreen Wet granulation is the most frequently used technique to process MSNs, because of the many possibilities inherent in it [ 106 ]. Conventional wet granulation is well-suited for the granulation of silica nanocarriers, but several things should be considered during implementation. There are two possible sequences: first, the drug loading, followed by the granulation of the loaded carriers [ 104 ], or the opposite way, the granulation of the empty carriers, then loading the drug into the prepared granules. In the first case, during the planning and implementation of the process, special attention must be paid to the critical process parameters to steer clear of premature drug release [ 104 ]. In general, it can be noted that as little moisture as possible should be used during granulation, consequently decreasing the risk of premature drug release. Still, simultaneously, moisture adequate to produce the desired agglomeration must be made sure [ 104 ]. The risk of premature drug release depends to a certain extent on the chemical structure of the API and the carrier. Szewczyk and Prokopowicz developed doxycycline-loaded MSN pellets with prolonged release kinetics [ 40 ]. First, the drug was loaded into the pores, and then pellets were produced from the loaded mesoporous material with other excipients by wet extrusion and spheronization. For comparison, traditional doxycycline pellets were also prepared. This study demonstrated the importance of utilizing mesoporous carriers for the delayed or sustained release of water-soluble drugs. Pelletization was a successful method to reduce the initial burst release of doxycycline; twice the release time was observed compared to traditional pellets [ 40 ]. Szewczyk et al. developed another DDS loaded with an antibiotic compound (cefazolin) for the treatment of osteomyelitis [ 66 ]. The amine-functionalized MSN was successfully loaded with the drug, and because of the powerful interactions between the negatively charged cefazolin and the positively charged surface of the carrier, a prolonged release of 5 days was observed, which made sure a longer antibacterial influence than with classic pellets. This was proven by the microbiological activity assays of the pellets against S. aureus culture [ 66 ]. These results are promising in antibiotic or anticancer therapy, where therapeutic concentration is needed for a longer period [ 40, 66 ]. A comparable outcome was presented in another publication about metformin-containing MSN pellets with prolonged release kinetics [ 85 ]. After drug loading, pellets were formed with the mixture of the preloaded carriers and chitosan solution, and then the pellets were coated with five layers of chitosan. Since the stomach is not considered the best possible absorption surface for metformin, it is advisable to delay the release until conditions in the intestines are ideal for maximum bioavailability. Chitosan plays an important role in this formulation; it slows down and delays the metformin release and offers delayed and prolonged release kinetics, thereby preventing speedy blood level peaks after application [ 85 ]. On the contrary, Wang et al. published a post on MSN pellets filled with poorly water-soluble carbamazepine, and they observed better oral bioavailability compared to commercially available tablets based on in vivo analysis performed on dogs [ 86 ]. In vitro dissolution studies confirmed a raised dissolution rate compared to crystalline carbamazepine due to the amorphous state of the drug within the pores. This immediate-release pellet formulation allows for a reduction in the drug dose, sustaining the same clinical influence [ 86 ].

Cite this article: Silica Raw Materials News. "What Is Microsilica? Composition, Benefits and How It Improves Concrete Strength ." Published 2026-11-20 11:46:50. /news/article.html
Disclaimer: Prices and data are for reference only and do not constitute purchasing or investment advice. Please credit the source when republishing.